Re: two webserver serving
You copied the indented output and when you pasted it the indentation was gone? Sigh. Well the first thing I would do is change all of the 172.60.xxx.xxx to 172.16.xxx.xxx or any number between 16 and...
View ArticleRe: two webserver serving
Hello, Sorry I just new to this and I need help. I do understand the 176.60 is not correct and it supposed 172.16. however I just need assistance as I got lost
View ArticleRe: two webserver serving
One step at a time. Can you change the subnet from 172.60.0.0/24 to 172.16.0.0/24? To do this, you can either enter configure mode and change every appropriate spot or you can use a text editor and...
View ArticleRe: EdgeRouter POE Console Refused Serial Connection
Do you have any unrecognized devices or unknown USB devices in the Device Manager? You likely need to install the proper driver since you don't have the serial/USB adapters listed. I can't remember if...
View ArticleRe: EdgeRouter POE Console Refused Serial Connection
FTDI should be readily recognized by windows 7+. If your using a cable powered by prolific throw it away and buy a new one powered by FTDI or theres another company i can't think of.
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
You should have no reasoning to use QOS for that little amount of users. Have you tried removing it?
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
I can't spot anything besides what I mentioned above. what is your topology of the access points? are any of them daisy chained off each other?
View ArticleRe: EdgeRouter POE Console Refused Serial Connection
Let's play with Ethernet for a while; could be an issue with your USB-Serial adapter. If you unplug the router from the internet (isolated to you and your laptop), what do you get with a ping to the...
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
Have you checked with your ISP to see if theres any issues on there side? If have you done any speed tests in directly from the modem?
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
Hey goldlineIT, first off, thank you very much for replying, I really appreciate it. I have not tried removing the QOS smart queue yet... I figured with everyone using GoToMeeting and all of the...
View ArticleRe: EdgeRouter POE Console Refused Serial Connection
Aaarrrgggh wrote:Let's play with Ethernet for a while; could be an issue with your USB-Serial adapter. If you unplug the router from the internet (isolated to you and your laptop), what do you get with...
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
None of the APs are daisy chained per se, they all go to a netgear hub, and the hub goes into the eth0 LAN of the ER-8.
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
ok thats a +, I've seen before where that cause problems. I would just confirm there's no problems on your isp side before you make any changes to your config. If it's ran for months then I doubt the...
View ArticleRe: Tapering Download Speeds, Intermittent Connection Loss
Ok awesome, thank you goldlineIT!! I am going to contact the ISP. After disabling smart queue the internet is certainly ripping, which I suppose is to be expected. The speed test is more...
View ArticleRe: Using spamhaus lists
Hank wrote:stig@ER-bgp-test# set firewall group network-group SPAMHAUS_DROP [edit] stig@ER-bgp-test# commit [edit]Note it is a network-group. This thread has been bleeping in my inbox for a couple of...
View ArticleRe: Spoke to Spoke connection
Thanks. One last question - should I create a vti interface per each remote site on the central site?i.e. I will have 2 vti interfaces on the central siteAlso, what is the meaning of the vti interface...
View ArticleRe: Open VPN networking is working but no internet access
How is the routing table of the client while connected in VPN ?And about the OpenVpn logs, on client side ?
View ArticleRe: Multiple VLANs on UAP-AC-PRO with Multiple SSIDs and an EdgeRouter Lite....
The one I have is a GS105E. Not the most intuitive nor easy to update. I have its TP-Link equivalent, the SG-105E, which appears to work better, although I have not tried it with the UAP-AC-LR. Given...
View ArticleRe: [Upgrade Bug] Firewall Rule on Bridged Ports Destroys Switchport Config (...
You configuration does not look right - you have LAN_IN firewall configured on eth2 interface which belongs to switch-port:ethernet eth2 { duplex auto firewall { in { name LAN_IN ...switch switch0 {......
View Article