Re: VPN Issues - can anyone here help?
Looks like you need to explicitly import and trust the CA cert that was used to sign mercury.THEIR_ROUTER.com 07[CFG] certificate policy 2.16.840.1.114413.1.7.23.1 for 'OU=Domain Control Validated,...
View ArticleRe: Router blocking websites
Some items were removed ( and marked with /// Info removed /// ) for security..But I have also whiped the config clean, and installed the Basic Setup Wizard with no additional changes and it still...
View ArticleRe: I bought the EdgeRouter X, can the power supply deliver 24v PoE or need...
thank you. I did not realize I could use the PoE adapter to power the ERX also. Good to know for backup
View ArticleRe: VPN Issues - can anyone here help?
Just to expand on what said mkdir /usr/share/ca-certificates/mercury.router.com cp /location/to/ca.crt/usr/share/ca-certificates/mercury.router.com/ca.cert vi /etc/ca-certificares.conf #add at the end...
View ArticleRe: Limit bandwidth to a specific destination IP / IP's
You can't do QoS at 750Mb/s link speed.Can you try with hwnat disabled?It will limit all download speed.....as it makes the CPU do all the routing
View ArticleHairpin NAT issues
Hi guys,having trouble with my hairpin NAT settings. ETH0 = WANSWITCH0 = LAN (192.168.100.0/24) My config here name WAN_IN { default-action drop description "WAN to internal" rule 10 { action accept...
View ArticleRe: Edge Point as Switch
Yup either the unifi or edgmax switches should do fine in that situation. The unifi switches might be nice since its easier to see the temps of the switch through the unifi control panel.Edgemax can do...
View ArticleRe: A simple question
Thanks for the reply. It's very intriguing for its simplicity but your writing style has raised many questions. I am an engineer, so I take ever word literally. Please let me ask some questions to...
View ArticleRe: VPN Issues - can anyone here help?
To do it via EdgeOS commands you can useset vpn ipsec site-to-site peer your_peer authentication x509 ca-cert-file /config/auth/CA.PEM
View ArticleER-8 to ER-8pro config
Can I load a config from an ER-8 to a ER-8pro without any issues?
View ArticleRe: EdgeRouter X - IMAP & SMTP problem only on Samsung Android tablet
GoDaddy is the mail service provider. Do you feel the problem may be at their end? Perhaps there's a deeper level of debugging information which might reveal what actually changes in the er-x between...
View ArticleER8Pro dropping SIP packets
Hi, I'm seeing messages like these in the log: Sep 17 14:53:43 ubnt kernel: nf_ct_sip: dropping packet: cannot add expectation IN= OUT= src=192.168.250.63 DST=192.168.220.196 LEN=652 TOS=0x00...
View ArticleRe: Hairpin NAT issues
I got exactly what you describe recently on a client's site ER-PoE (maybe after upgrading to 1.10.6?).Accessing a services over Cellular works, accessing the same services over internal IPs too... but...
View ArticleRe: A simple question
I've been doing something quite similar (I think) by bringing the IP cable from the modems & radio leg into an unmanaged switch then patching the switch to eth0 and an open ERX port configured to...
View ArticleRe: Support for g.fast SPF
Hum,digging a bit deeper I found this on the Metanoia website MT-G5321 SFP is one of the Metanoia PHY SFP product series complying with the ITU-T G.9701/ G.9700 G.Fast standard which can provide up to...
View Articlecombined eth2/3/4
Hi,I see that on Edger Router ports eth2/3/4 are combined as the same switch0 when Wizard is run. While I can manually remove say eth4 from the this switch (and assigned a specific LAN to it), I wonder...
View ArticleERX Wifi vlan routed to VPN connection
Looking for a bit of assistance on this as I am struggling to get the routing to work. I have a ERX-SFP with a few different networks. One network is configured into eth1 for DMZ/IOT devices, while the...
View ArticleRe: VOIP issues
ER-PoE5 won't be able to do QoS at 100Mb/sIf you end up with 100% CPU, you might be better off without QoS I normally set QoS bandwidth at 85...90% of link speed.
View Articleneed to bridge a ER-x to a mikrotik to bridge Public IP's for client
Right now we are doing 1;1 NAT and we have Proxy Arp on with the Mikrotik Cloud Core being our core router Currently, our clients use a Mikrotik and we Bridge it to our cloud Core and can do 1:1 NAT...
View ArticleRe: combined eth2/3/4
The ER-X has an internal switch chip. Eth2/3/4 are included on the switch chip by the wizard, so you can operate a small network without needing a separate switch. Yes, you can remove one or more more...
View Article