Re: Firewall Rule Accessing VLAN ETH2.100 TO WAN1 Port Forward
As soon as you try to connect to your public IP address from inside your network, you need NAT loopback / NAT hairpin. I recommend against doing so as this would actually route the traffic from within...
View ArticleRe: Firewall not blocking traffic when asked...
From eth2, are you able to access the router at 172.16.1.1, or are you able to access devices in the 172.16.1.0/24 network ? Are different things, the access to the ip address 172.16.1.1 can be denied...
View ArticleRe: How do I setup PAT on EdgeMax / EdgeRouter 4
Hi , welcome to the UBNT forums! PAT is generally referred to as 'Masquerade' on the EdgeMAX platform. To configure something similar to ip nat inside source list <acl> interface <if>...
View ArticleRe: Update using CLI
add system image <url to firmware.tar> Get the proper URL for your router model HERE
View ArticleRe: Firewall not blocking traffic when asked...
Thanks for your replies. It seems that it’s only http and https that I seem to be able to access on 172.16.1.0/24, but it’s all hosts that serve web pages on that subnet including the router at...
View ArticleRe: Limit bandwidth to a specific destination IP / IP's
wrote:Hi all. Due to login-issues with League of Legends through my new ISP, I have to investigate a possible solution in throttling the bandwidth to their network.What info do you need from me to set...
View ArticleRe: Dual networks with bordered internet via UAP-AC
Is that router enough? I didn't want to spend too much more!
View ArticleERL vs ER4 - Performance and Network Services
Quick question here.. Is there any reason to chose the ER4 over the ERL, if I don't need the SFP port? I'm planning an upgrade/install in a coffee shop which sees pretty high foot traffic. The ER will...
View ArticleRe: Limit bandwidth to a specific destination IP / IP's
2. What the heck is League of Legends It's a game. leagueoflegends.com1. What login-issues? Since I switched from Ziggo to T-Mobile fiber, I have trouble logging into the game. 50/50 chance.3....
View ArticleRe: EdgeRouter X/X-SFP check bootloader version
wrote:The test date is only on the shipping box, however, you could also use the date code which is on the unit itself before the MAC ID. Anything on or after the date codes below for each model...
View ArticleVPN Issues - can anyone here help?
Thsi was initially posted in the Unifi Routing & Switching forum as it's relating to a USG-XG but I've had no luck there. Given the USG is really just an EdgeRouter (it runs EdgeOS) without the GUI...
View ArticleER-X Plusnet UK DNS Failing Problem
Since last Friday, I am experiencing DNS resolving issues. bnt@ubnt:~$ show dns forwarding nameservers ----------------------------------------------- Nameservers configured for DNS forwarding...
View ArticleRe: Bug ERL: keep losing VPN config
Took me a while to get it ... but I finally have a serial cable and all. But sadly that's pretty uneventful This is the output: INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal...
View ArticleRe: Firewall Rule Accessing VLAN ETH2.100 TO WAN1 Port Forward
Hi jonatha, thanks for the hint - I've choosen only eth2. Now everything works fine.Regards Mark
View ArticleRe: Firewall Rule Accessing VLAN ETH2.100 TO WAN1 Port Forward
Thanks for the explanation about hairpin. Now everything works fine. Regards Mark
View ArticleRe: OpenVPN Site-to-Site VPN Not Working Anymore
It does't appear that it was explicitly blocking that port, as I had the same problem a few days later with 1193. I moved it to a higher numbered port and it's been working for a few days, but if the...
View ArticleRe: ER-X SFP Site-to-Site IPSEC through PPPoE, No traffic
After more research I'm quite sure my tunnel is working fine. However, even though the auto-firewall rule shoule be setting up the firewall correctly, it appears to be doing nothing. Can someone tell...
View ArticleQuestion about OpenVPN instructions in UBNT help
The OpenVPN instructions (https://help.ubnt.com/hc/en-us/articles/115015971688) contains in step 18 and 19 the use of IP addresses in the 172.16.1.xxx range. What do these mean? The inside LAN is...
View ArticleRe: A simple question
Thank you so much. This is terrific! Very clear very easy to follow.I have one question: Since physical access to the radios is so difficult, the only risk I see here is the possible need to perform a...
View ArticleRe: Firewall not blocking traffic when asked...
Sorry I didn't read which interfaces you specified properly. It's late and I'm having trouble working out how exactly the hairpin nat and port forwards could be the cause, but that configuration does...
View Article