L2TP server and OpenVPN client on the same router?
Hello, I have a L2TP server setup for remote access on my X router. Now I am looking for a SSL vpn service provider for internet access over VPN. I guess my question is, can both of those run at the...
View ArticleRe: 2 wan 5 LAN. 5 ip external adresses 1 of each lan
There are 6 lines from the isp 6 incoming coax lines and 1 extra backup whit a celuar router just in case so per 5 lan there is 1 ips line to the outside world
View ArticleRe: Requests/suggestions for new hardware models
1. Comprehensive up to date manuals, books, videos etc. 2. More CLI features in the GUI 3. Rackmount form factor
View ArticleWAN on VLAN on ER-X switch, no internet on LAN
I tried replacing the supplied router from Dutch internet provider Telfort with a Edgerouter-X. They use tagged VLAN 4 for IPTV and VLAN34 for internet. I had already seen configurations on the...
View ArticleRe: 2 wan 5 LAN. 5 ip external adresses 1 of each lan
Okay, so you have six physical lines coming in from the street? You've still only got as much "redundancy" as the lines then (read - not much ... they likely all terminate in the same cabinet down the...
View ArticleRe: Requests/suggestions for new hardware models
TheRedBaron wrote:The ES-16-XG is great, but was hoping that given that they are more likely for core switches, providing uplinks to the 1G edges... would hope that they would allow for virtual...
View ArticleDestination NAT help for https
I have an Edgerouter Lite that is hosting a site with an Exchange Server running OWA on port 443. Currently the Source NAT is masquerading all traffic from BR0 out interface ETH2. The Exchange server...
View ArticleRe: Port forwarding problem multiple interfaces
Thanks! Invisible rules make things more confusing ... show system nat Specified configuration path is not validIt can't be set, either; there must be some other command for this.
View ArticleRe: Another slow PPPoE story
It was the docker bridge's fault. The thing just behaved erratic, and the speed tests were running from inside a docker container.<br>Switched to macvlan driver and everything works perfectly...
View ArticlePPPoE does not connect
Hi, My ISP is changing its configuration from IPoE to PPPoE and I need to adapt...I have configured the modem in bridge mode and now I need to establish the PPPoE connection from my Edgerouter. I have...
View ArticleRe: Destination NAT help for https
Did you changed the https port of the ER, from 443 to eg 4443 ?set service gui https-port 4443commitsaveDid you checked hairpin NAT ?Cheers,jonatha
View ArticleRe: Destination NAT help for https
Isn't this what hairpin-nat is for? I just tried to make such a rule, and I don't see how it could work. What does your rule look like? Is it possible to define which rule is applied to which...
View ArticleClik here to view.
Re: Destination NAT help for https
I mean, after having changed the ER https port, something like this
View ArticleOSPFv3 Over Sit Tunnel
While troubleshooting an OSPFv3 neighbor stuck in ExStart over a sit tunnel, I came across this post. Correcting the link-local address from /128 to /64 corrected the ospfv3 neighbor problem. This...
View ArticleRe: WAN on VLAN on ER-X switch, no internet on LAN
That indeed solved the problem. Thank you for your quick reply.Should this be seen as a workaround for a bug or a misconfiguration from my side?I assumed switch0 was usable as LAN, because I could...
View ArticleRe: Port forwarding problem multiple interfaces
If you really want to see the (hidden) rules GUI/CLI creates, look into iptables, since that's used under the hoodsudo iptables -L -n -v sudo iptables -L -n -v -t nat
View ArticleRe: Create a Firewall Rule using Deep Packet Inspection (DPI)
I guess that's how dpi works.It has to allow some packets, to see what's inside them.What's your config?
View ArticleRe: PPTP client not working when router is connected directly to ISP, but...
do the log files, like /var/log/messages give a clue?
View ArticleRe: Google Fiber with 5 Static IP Addresses
I have tested our connection and get about 960Mbs up and down.Howerver the computer you use to test has a lot to do with it.I have some dual cores that will only test at about 450 - 540 Mbs.I use an...
View Article