Re: The "default VLAN" and network (192.168.1.0/24) can't communicate with...
In VLAN aware switches, internally all VLANs are tagged. On an ethernet port carrying multiple VLANs, you can chose a single VLAN to be untagged on that port. That's what PVID configures. (In Cisco...
View ArticleRe: DNAT Issue (Can the source address be internal?)
That's what DNAT does. You can also configure SNAT on the internal interface matching that traffic if you want to translate the source IP as well.
View ArticleRe: ER-X Outdoor enclosure advice
Did you look at EP-R6 ? it's an ER-X-SFP already in outdoor case.Temperature range might still be a problem though
View ArticleEdgeRouter PoE - VLAN and Switch
I apologize if this is the same question as answered in this post. I must admit, I am new to the EdgeRouter and since this concerns security, I'd rather ask twice. To better explain my scenario, I've...
View ArticleRe: Custom logfile in /var/log is removed automatically
dpurgert wrote:Does the loss of the log file correspond to a reboot or a firmware update?As I recall, /var/log is mounted to a tmpfs, which would get cleared on reboot.It is, that's probably why....
View ArticleRe: Custom logfile in /var/log is removed automatically
i like rsyslogd, and spinning rust, tbh.
View ArticleRe: IPSEC Site to Site VPN Not Working
Downgraded both routers to 1.8.0. Both routers came back online and the s2s did reconnect with the same outcome. Some how I lost my remote connection to the office so I can't log in anymore to mess...
View ArticleRe: EdgeRouter PoE - VLAN and Switch
No, the ER-5 is not "vlan aware". All three ports (eth2,3,4) will carry VLAN1 untagged / VLANs 2 & 3 tagged. If the PCs are capable of handling VLANs, this'll work out okay. Otherwise, you'll...
View ArticleRe: Auto devices configuration
or a power-on reset ...might survive the "hold the reset button for 20 sec when the router is already running" reset though.
View ArticleRe: ER-X Outdoor enclosure advice
as mentioned in the other thread, they'll work in an enclosure and keep themselves warm. I'd go for whatever box it all fits comfortably in - less air to keep warm in winter. White box (or other light...
View ArticleRe: EdgeRouter PoE - VLAN and Switch
Thanks for the quick response. 1. Shame. It is a good product and I hope Ubnt add this feature to a new FW release. If I understood correctly, the hardware is capable of doing this - it's a software...
View ArticleRe: EdgeRouter PoE - VLAN and Switch
1. Possibly - The ER-X models just got it recently as it is (like within the last 4 months) 2. got it 3. Not without nuking your throughput. Honestly, it sounds like what you really want is an ER-X[-SFP].
View ArticleRe: EP-R6 v1.9 set VLAN Aware enabled and pvid to 1, can't access anymore
Again, read upon commit-confirm
View ArticleRe: EP-R6 v1.9 set VLAN Aware enabled and pvid to 1, can't access anymore
yeah, it's too late for that.
View ArticleRe: [Bug!Bug!!Bug!!!] L2TP VPN connection can't access internal LAN address...
If you have LB configured you need to run following script in order for VPN to work, it'll add appropriate routes to LB WAN tables for ingress VPN traffic to reach local LAN. This issue is currently...
View ArticleRe: EP-R6 v1.9 set VLAN Aware enabled and pvid to 1, can't access anymore
Yeah, I meant for future
View ArticleRe: Duckdns and EdgeOS
This method is the cleaniest/easiest I've seen thus far: http://blog.marc-seeger.de/2015/09/07/duckdns-on-the-ubiquiti-edgerouter/
View ArticleEdgeMax heat dissipation data?
I'm designing the cooling for a cabinet where some EdgeMax products will be used (such as the EdgeRouter Pro and EdgeSwitch 48 500W) - where can I find the heat dissipation data for those products?...
View ArticleRe: Eth0 Disappears
It was user error. I was putting the CIDR instead of the subnet mask.
View ArticleRe: Issues Setting Up EdgeRouter and EdgeSwitch
dpurgert wrote:Okay, you've got a few things wrong in the ER Config still. Interfaces / directly connected networks: ethernet eth1 { address 10.142.0.1/16This shouldn't be in your routing table :...
View Article