Edge Router Pro - IPSec Traffic Bandwdth
We are currently using a Cisco PIX 525 and 535 to manage about 240 tunnels. How much ipsec traffic could a ER Pro handle?
View ArticleClik here to view.
Re: gui is internet accessible
I do not see anything listed under port forwarding either in the gui or cli.
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
That's good news. I'm not familiar with scp. I know this has FTP as an option. Could I enable FTP and upload it to the router that way? Also, what's the format for the add system image command? I saw...
View ArticleRe: gui is internet accessible
Well, you could try to add a firewall rule inside WAN_IN to drop 443 TCP/UDP and see if you can still have access externally.
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
Scrath that. It was Telnet, not FTP :\.What is SCP?Edit: Looks to be a form of SSH. I'm on a mac by the way. I've never used SSH though.
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
Are you on Windows? Use WinSCP then ...it's simple GUI app.The the command isadd system image /tmp/file_name
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
Once you get to the CLI via SSh, this article is immensley helpful for upgrading firmware from it. https://help.ubnt.com/hc/en-us/articles/205146110-EdgeMAX-Upgrading-EdgeOS-firmware OIn windows you...
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
Sounds like the internal storage limit was hit. Try this command via ssh delete system image Then Try uploading the file via the GUI.
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
I looked up SSH and was able to upload the file without issue. I had already checked to see if it had an old system image on it (it didn't) other than the running image.I'm looking through the CLI link...
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
et al. There is a bug in curl on 1.2.0 it'll never download the image, it'll aways fail even from CLI when you let it donwload from URL. You need to get the firmware on the router first and upgrade...
View ArticleRe: gui is internet accessible
I suppose I could, but im really trying to understand how anything at all is reachable via the internet. It certainly seems that it shouldnt be based on the router config so I am confused by this.
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
BranoB had it. The SSH bit was easy enough. Took a few seconds to figure out hte format for the command but worked without issue. Once I had it on the router I had to CD back into my home directoery...
View ArticleRe: gui is internet accessible
Looking further, is it possible the uPNP is allowing it?
View ArticleRe: gui is internet accessible
Maybe you have UPNP enabled? It bypasses firewall rules.
View ArticleRe: gui is internet accessible
Personally first thing I do from the gui is create a /32 management ip on the router then change the gui listen address as follows: set service gui listen-address (x.x.x.x/32) I created or you could...
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
Many thanks! The reboot completed, and the version is now showing 1.9.0. Seems like a really bad idea to sell any of these with a version of the EdgeOS that can't be upgraded unless you happen to find...
View ArticleRe: New router. Trying to update to 1.9 but it fails (There was an error...
Man this was a big update apparently. I'm looking at the new tabs. Do I need to set things like the WAN interface (currently it's set to '--').Essentially I have everything else configured how I want...
View ArticleRe: Relation between EdgeOS and Vyatta/VyOS
Hello,1) EdgeOS runs on mips platform for generic x86 you need VyOS2) Not sure about EdgeOS, in VyOS support for v6 added in betas of 1.23)GUI, maybe some other integrations with unifi, or other ubnt...
View ArticleRe: ERX-SFP stops responding during heavy uploads
I am testing a workaround that limits the upload bandwidth. I have set the upload bandwidth to 60 mbps at the moment. Will post my test results in a day or two.
View ArticleRe: Odd OSPF route behavior over GRE tunnel
There are some default routes floating around in OSPF at the hub. Interesting thought, I could see where that could be an issue. Will have to turn stuff on and check the routing table. Is there a way...
View Article
