Re: PPTP server setup - access to router web GUI is ok, but no access to...
Hi... Sorry for exhumating this from 2 months ago, but I had no time to keep looking at this. I have now re-taken the topic, upgraded to v1.9.0, and now find these errors when a client tries to connect...
View ArticleVRRP Master does not send HELO multicast messages
Hi, Setup I have a VRRP cluster with 2 nodes. Both nodes have 3 vrrp groups. The 3 vrrp groups are in one vrrp sync group. Symptoms: 1. Both nodes become and stay master. 2. Tcpdump reveals that only...
View ArticleRe: Update to 1.9 broke my l2tp/ipsec
Okay, I got the sudo su - now able to run iptables (had used sudo bash before and couldn't find iptables). So before I test this, can you kindly provide a backout command? I'd like to confirm your...
View ArticleRe: ER-X platform thank you
Might need to start a new thread to figure this out but my PTP IPsec link works ... is stable and fast ... with offload ... FW is 1.9: xxx@router# show system offloadhwnat enableipsec...
View ArticleRe: Update to 1.9 broke my l2tp/ipsec
I would run the following: iptables -t raw -D PREROUTING -i l2tp0 -j MARK --set-xmark 0x00000000/0x7f800000Iptables -D deletes the equivalent entry added with the -I in the previous command. The "-t...
View ArticleRe: ER-X platform thank you
I've just update the 1.9.1 apha1 fw for test and now Vpn works with offload... ;o) http://community.ubnt.com/t5/EdgeMAX-Beta/Previous-beta-releases/m-p/1720473#M18492
View ArticleRe: is it possible with EdgeMAX Lite to have 10 GW pm the WAN segment and...
I'm sorry, but I'm lost here. Are you saying you want each internal IP address, to use an external IP address for nat, is that it?
View ArticleRe: is it possible with EdgeMAX Lite to have 10 GW pm the WAN segment and...
I will try to simplify.The edgemax lite has 3 ethernet ports and a console.In the eth0 I am connecting another switch with 100 users(192.168.2.254 is the edge router).on the eth1 or eth2 (whatever is...
View ArticleRe: VRRP Master does not send HELO multicast messages
Did you run tcpdump from higher priority system?
View ArticleRe: VRRP Master does not send HELO multicast messages
this is what my internal live lab router ( 1.9.0 ) looks like. On your configuration it looks like your missing the ("authentication") section. vrrp { vrrp-group 301 { advertise-interval 1...
View ArticleUniFi AP AC LITE on Guest VLANs can't communicate to internet when Load...
I have two UnFI APs on a Guest VLAN 1005 in port 3 and 4, and using the standard load balancing config between two DSL modems, unless I disable one of the modems or configure without load balancing,...
View ArticleRe: UniFi AP AC LITE on Guest VLANs can't communicate to internet when Load...
How did you determine that you're using "standard load balancing config"? If you have two DSL WANs I'd expect that your WAN interfaces are pppoe. Otherwise I'd guess your modems are NATing the WAN IPs...
View ArticleRe: Edgerouter X ipv6 hwnat
Can one of you guys try changing:prefix-length /60to this:prefix-length 60and see how that goes after a commit? Shouldn't need a reboot, but I'd give that a whirl if it doesn't have an immediate impact.
View ArticleClik here to view.
Remote programming/consulting work
Hi Guys, apologies if this isnt the correct forum, is there a forum where more advanced users sell consulting/freelance EdgeOS/Unifi programming and strcuturing services? I have worked with some...
View ArticleClik here to view.
Re: Edgerouter X ipv6 hwnat
Aggraxis wrote:Can one of you guys try changing:prefix-length /60to this:prefix-length 60and see how that goes after a commit? Shouldn't need a reboot, but I'd give that a whirl if it doesn't have an...
View ArticleRe: UniFi AP AC LITE on Guest VLANs can't communicate to internet when Load...
I used the Load Balancing Wizard. The DSL modems are set in bridged mode and I am getting external IPs on each one via DHCP. They are on different network segments. I've been going through learning...
View ArticleRe: Further setup questions on new ER-X (1.9.0) - GUI authentication and...
, the GUI configuration does have firewall config, yes. But it's enormously easier to set up what I want — and maintain it — using Shorewall. Thanks for the no-more tip, I'll give it a try. , thanks...
View ArticleRe: Issue with ports not forwarding
So my gateway on the wan eth0 is correct yeS?So where shall I go from here?
View ArticleRe: USG to ERL IPSec trouble
I've managed to get this to stand after hours of trial and error and swaping back and forth on ERL firmware versions. In the end I had to manually specify the left and right subnet in the ipsec.conf...
View ArticleRe: My HowTo on multiple dynamic ospf-gre-ipsec tunnels
Excellent writeup. A few very minor issues: Under the section titled: Configure the ipsec tunnel: (HUB public ip is xx.xx.225.218) The 6th line references "esp-transport" but should use...
View Article