Re: Problem configuring edgerouter lite as DHCP

---

goldlineIT wrote:
set up a static route for 192.168.1.0/24 out your ethernet port

---

That actually doesn't work (or at least, I could never get it to work) because a lot of cable modems/ADSL modems will refuse connections from devices not in their same subnet. I had to set a NAT rule on my ERX (and no firewall rules). The OP's needs should work with:

set service nat rule 5011 description 'adsl Modem'
set service nat rule 5011 destination address 192.168.1.0/24
set service nat rule 5011 log disable
set service nat rule 5011 outbound-interface eth0
set service nat rule 5011 outside-address address 192.168.1.15
set service nat rule 5011 protocol all
set service nat rule 5011 type source