Re: Requests/suggestions for new hardware models
justinhayes wrote:Moreover, offloaded traffic doesn't touch the CPU, so speed isn't a factor there.Well I wouldn't go that far after all the ethernet driver is software running on the CPU. From the...
View ArticleRe: Multiple DHCP IPs on WAN
Probably didn't change the NAT outbound-interface to peth.
View ArticleForcing OpenDNS results in a reverse engineering challenge
Greetings, a few days ago I found some DNS-related commands on the internet, I plugged them into my ERL and got exactly the results I wanted. These commands forced all DNS traffic to the opendns...
View ArticleRe: Forcing OpenDNS results in a reverse engineering challenge
To get the commands execute show configuration commands | no-more on your router
View ArticleRe: ERL and VPN on Secondary LAN in WAN+2LAN2
Use PBR on port 3 , sending all traffic out via VPN instead of normal gateway KB PBR
View ArticleAuto Provisioning Polycom Phones via DHCP Option 160 with EdgeMax/EdgeRouter
Need to automatically provision your Polycom phones against Endpoint Manager in FreePBX, or another config source with a Ubiquiti EdgeRouter? Simply add this to your DHCP configuration and substitute...
View ArticleRe: L2TP not responding externally
Wow, I've been tearing my hair out for the past 3 hours trying to figure out why my VPN didn't work over the WAN. Turns out a Macbook on the network decided to steal port 4500. Adding the ACL to...
View ArticleRe: Routing locally originated traffic after failover in 1.9.0
Does anyone have any idea about this? The only way I can think to work around lb-local enable not working as expected in my case is to: Not use the DNS forwarding service but point clients directly to...
View ArticleRe: Auto Provisioning Polycom Phones via DHCP Option 160 with EdgeMax/EdgeRouter
Yep, did something similar for Mitel phones on dhcp option 43. Kind of a squirrelly config, but it works..
View ArticleRe: Forcing OpenDNS results in a reverse engineering challenge
Thanks. That helped me to find it. The DHCP server on my internal network gives the clients the Active Directory controllers for DNS, and they in turn point to the ERL. A ruleset on my UTM ensures that...
View ArticleRe: Usage of the eth+ wildcard to match vlan interfaces
At least one of you from ubnt must know the answer to this?
View ArticleRe: EdgeMax Firmware Upgrade - Not enough disk space for root file system
Hi, I ran into the same issue yesterday with my ER-X under EdgeMax v1.9.0:After a commit/save on configure (adding an openvpn interface), I loose all access to the ER-X :-/ Not sure which is the issue...
View ArticleChromecast in a routed network
For anyone interested, I made a short description of the absolute minimum configuration to get devices to reach a Chromecast in a routed environment. http://www.cron.dk/edgerouter-and-chromecast/ Best...
View ArticleRe: Routing locally originated traffic after failover in 1.9.0
Your table, how did you check which interface was really used?Packets with source of eth3....can be sent on eth4.....masquerade rule will even change source to eth4Look at image in...
View ArticleRe: Routing locally originated traffic after failover in 1.9.0
Thanks for the response. I used tcpdump -i interface to see which interface packets were really going out. It's confusing that packets that should come from eth3 (specified with curl --interface eth3...
View ArticleRe: OSPF Load balancing?
I setup a VRRP on two routers in the lab and I got it working with sharing the load and redundancy (In case either fails). Only thing that left is the link bonding. I had a look on the Edge Points and...
View ArticleRe: SoftEther VPN for the EdgeRouter (Release)
Thanks for the links but I have toubles to install it on Edge router lite. I dit : - copy cmd and server image to /home/ubnt using winscp- connect to the EdgeRouter Lite via ssh, user ubnt- type sudo...
View ArticleRe: Usage of the eth+ wildcard to match vlan interfaces
It's a big tech conference this week - a lot of their guys are likely there. Why don't you test it and see for yourself?
View ArticleRe: Forcing OpenDNS results in a reverse engineering challenge
show configuration will show you entire running configuration in structured mode, show configuration commands will show you configuration using correcponding commands ...glad you found what you were...
View Article