Re: OSPF Load balancing?
This was my first idea too. But when I went out in the field to connect the sites, the bandwidth was not enough. Especially in the peak times with all the interference. I even prepeared for VRRP. How...
View ArticleClik here to view.
Re: Bridging an ASDL router to an X-SFP and setting up PPPoE
Ok I'm going to need some help here, I can't get this working
View ArticleClik here to view.
Re: Bridging an ASDL router to an X-SFP and setting up PPPoE
I've set the router to bridge mode, that appears to be ok.I've run the Basic wizard with PPPoE and entered the username and password. Netcomm out from LAN1 into eth0 of the edgrouter. Laptop into...
View ArticleEdgeRouter Lite and VPN IPSec
Hello!Im not able to configure VPN connection for my iOS devices using IPSec.I have followed this...
View ArticleMy PPTP VPN setup to privateinternetaccess.com
If anybody is interested, I made a small guide about how to set up a VPN tunnel to privateinternetaccess.com. But of course this guide could be used for any other VPN provider that supports PPTP....
View ArticleRe: EdgeRouter Lite and VPN IPSec
Pascalg wrote:...But if I do a commit it takes some seconds and then I get the message that DHCP for Eth0 will not work (the exact message I don't have on the moment)...Is this the message you saw when...
View ArticleRe: DHCP from provider fails, manual refresh fixes it
4 rules : Accept ICMPAccept ESPAccept Related/EstablishedDrop Invalid State and the default Drop. Never had to use anything else before.
View ArticleRe: EdgeOS 1.9: PPPoE "% Malformed gateway or interface not found"
hazenme wrote:ls -l /var/coretotal 15672-rw------- 1 root root 16424960 Oct 12 19:42 core-nsm-634-1476301323 It does look like nsm is crashing.You are right. I did receive reports about random nsm...
View ArticleRe: Bridging an ASDL router to an X-SFP and setting up PPPoE
Can you run show configurationand post the entire output from that here. (Obvisoulsy you can hash out the usernames and passwords)
View ArticleRe: Dynamic DNS not connecting
Earlier posts that protocol is not needed nor web was incorrect for me.Web: dyndnsProtocol: dyndns2Now everything is connected. However still not able to get the ports to forward correctly. But believe...
View ArticleBricked ERPro-8
This i now my third edgerouter that got bricked, i had two erl before with same symptom and now a erpro-8. The first erl i didnt get changed by rma even though ubiquiti knows its a hardware issue with...
View ArticleClik here to view.
EdgeRouter and SNI
Hi, does any of the EdgeRouters support SNI (server name indication).I alredy have a server listening on 443 for https and now i want to configure SSTP VPN (443) on another server.. i need something in...
View ArticleRe: Bricked ERPro-8
The issue on the ERL's is solved by replacing the chinese usb stick with transcend usb 3.0 https://hilo90mhz.com/ubiquiti-edgerouter-lite-erlite-3-internal-usb-storage-fail/ On edge router pro there is...
View ArticleRe: EdgeRouter-X as PPTP VPN server in existing network
The ADSL modem/router contains the DYNDNS address and has it's own firewall. VPN passthrough is enabled. What else needs to be in place? This is my config thus far: Apex@ApexEdgeRouter:~$ show...
View ArticleClik here to view.
Re: 48VDC Power Adapter for EdgeMax Router POE?
Hi, I guess as well, that you only get an 60W Power Adapter with your ERPoe-5 within the EU.Just got my ERPoe-5 and now I have to buy an extra power Supply to power GS90A48) my Unifi AP greetings1of16
View ArticleClik here to view.
Re: Bridging an ASDL router to an X-SFP and setting up PPPoE
Sorry... Turns out I did indeed have an incorrect password, though it still connected for some reason (I did try a purposely bad password and that failed to connect, so assumed I was all good). I...
View ArticleRe: 48VDC Power Adapter for EdgeMax Router POE?
Although then ER 5 PoE has been available with a 48 volt PSU in the US for some 2 years there are still 24 volt versions here in the UK.Taking time to filter through still it seems.
View ArticleRe: Edge Router-X PPPoE configuration
Hi,I done reset and started again but the same happends. I noticed that the configuration i done through the GUI not reflecting on GUI window after restart, but showing while checking on CLI. I Have...
View Article