Re: Safari 10 no dynamic graphics
Yes, this is a bug in 1.9.0 already reported. Use Chrome for now.
View ArticleRe: Possible hardware defect?
No, I have no ideas. If you are certain the router frequently fails on its ownthen you should RMA it. These devices were shippedwith 24V and 48V supplies, I believe; either will work. Dave
View ArticleRe: Possible hardware defect?
Could you please advise me how I can request for the RMA?ThanksJames
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
Nothing obvious jumped out to me after reviewing your config. My recommendation is to use WireShark or tcpdump to analyse the broadcasts and responses on eth1 and eth1.2 and see if there are any other...
View ArticleClik here to view.
Bell PPPoE and IPTV with FTTH, Guide, configuration and tidbits.
Hi all. After gathering information here and there, some wireshark analysis (including getting your old 10/100 *hub* that you forgot you had and that is so useful for that purpose) and a few missed...
View ArticleRe: Bell PPPoE and IPTV with FTTH, Guide, configuration and tidbits.
Aaaaaaaand, the cheat sheet: #### Cheat Sheet ####### Basic Stuff for firewallset firewall all-ping enableset firewall broadcast-ping disableset firewall ipv6-receive-redirects disableset firewall...
View ArticleRe: Need help accessing Modem Configuration Pages
FWIW my Time Warner cable modem is also only available at 192.168.100.1. OP, you can pretty easily create a NAT rule to funnel requests to 192.168.100.1 out one of the interfaces. I think if you want...
View ArticleRe: ERL Web GUI Reverse Proxy
You might have to accept the beta ToS and agree to test it. You don't need to activate the beta firmware when they are releasrd though.
View ArticleIs there an easy way to copy the static settings from one DHCP server Vlan to...
Hi all, Currently I have the main lan on eth5 set to 192.168.1.0/24. I have another 6 vlans. Since 192.168.1.0 is the managing lan, I wanted to move all the devices from there to another vlan say...
View ArticleRe: REST API?
If you want to fully automate it, you will need to create a complete bash script for the router to execute the desired CLI configure commands and to do that you will have to google to find the special...
View ArticleRe: Have pvlan been actually implemented?
Checking in at 2016, has pvlan been implemented?
View ArticleRe: GUI not updating number of group members for Firewall Group
awesome, thanks! please let me know... I'd really like this to be reflected in the gui, and survive reboots, etc. Also, if you have any tips for "updating" it in some smart way, that would be good....
View ArticleRe: Edge Router POE - cannot enable POE from GUI
Got error on Firefox(wasted 2 hours)Works great on Chrome.......UBNT Please FIX
View Article2 wan 2 lan
need another lan with ip 192.168.10.1 on the wizard for load balancing config 2 wan and 1 lan.(my config must be 2 wan and 2 lan ) edge router pro could the new config be so i can download it because i...
View ArticleRe: Have pvlan been actually implemented?
Am I the only one not understanding this PVLAN thingy?PVLAN should be implemented on L2 domain (switches or APs), I don't get the point of enabling this on a L3 device (=router). Traffic within same...
View ArticleRe: Edge router ignoring valid routes as Martians
HI, we were in 1.8.0 and upgraded to 1.9.0 this morning all went well, the messages have disappeared and I can ping a machine in network in 128.0.X.X Thanks.
View ArticleRe: Edgerouter X PPPoE won't connect
I tried all the vatiations (dhcp, no IP and gave it and IP) but no joy. I tried a couple of variation on the MTU settings, the one that BT suggest and the one that the modem picks up when I run the...
View Article