Re: Ipsec VPN tunnel issues
Have you tried ping from a host in the local subnet to a host in the remote subnet instead of testing from the router. When you test from the router you need to specific the LAN subnet to use....
View ArticleRe: EdgeRouter-X IPv6 on Comcast BCI
If the DPC3939b were in bridge mode then I wouldn't be able to use my static IPv4 addresses. Bridge mode on business class can only be done if the account isn't using statics, when it is using statics...
View ArticleRe: iperf shows "Sent 0 datagrams"
Works fine on my ER-X running v1.9.0: ubnt@ER-X-1:~$ iperf3 -c 172.16.3.15 -u -b 4M Connecting to host 172.16.3.15, port 5201 [ 4] local 172.16.3.23 port 41500 connected to 172.16.3.15 port 5201 [ ID]...
View ArticleRe: Diagnosing U-Verse Issue / How to allow DHCP through Edge firewall?
It seems that this is related to the 5268AC having a 10 minute DHCP lease. https://forums.att.com/t5/Residential-Wi-Fi-Gateway/Pace-5268AC-DMZPlus-Issue-drops-lan-every-10-minutes/td-p/4843792
View ArticleRe: VPN to LAN
I'm stuck, thank you for your ideas , my client config is: clientdev tunproto udpremote domain.com 1194cipher AES-256-CBCauth SHA256resolv-retry infiniteredirect-gateway def1nobindcomp-lzo...
View ArticleRe: EdgeRouter Pro - Is there a way to log the VPN User connection and...
You didn't mention what flavor of vpn, but I would imagine the best way for pptp & l2tp is to use radius authentication. That will give you a record of both logins and logouts and how much data.
View ArticleRe: EdgeRouter Pro - Is there a way to log the VPN User connection and...
l2tp and it is local users... I would think they could add the connected user to the log and that would suffice.
View ArticleClik here to view.
Re: Edge Router - Remote Management Best Options - VPN / Non VPN?
agidi wrote: i cant get the darn "simple" port 22 rule working. deamon, keypair, tunneling . lol Because it's wrong Change this: rule 20 { action accept description remoteadmin destination {...
View ArticleRe: Diagnosing U-Verse Issue / How to allow DHCP through Edge firewall?
yuck. that shouldn't really matter to the ER -- but it could cause trouble if ATTs DHCP is slow.
View ArticleRe: ERPOE5/LoadBalancing2/NanoBeams not routing traffic
I don't really see anything wrong with the config, but could you try running /usr/sbin/ubnt-add-connected.pl and see if that makes a difference?
View ArticleRe: ER-X v.1.9.0 L2TP fails if IPSec offloading enabled
I haven't really been able to reproduce this issue, so you may want to post your full config.
View ArticleRe: ERPOE5/LoadBalancing2/NanoBeams not routing traffic
I assume this needs to be on each load balancer?
View ArticleRe: Edge Router - Remote Management Best Options - VPN / Non VPN?
The best option I've found for remote management of the router (ERL or ER-POE) and devices behind it:Start with a default configuration. Upgrade the firmware.Run the WAN + 2LAN wizzard.follow this...
View ArticleRe: Edge Router x NAT with PPPOE to ATT static IP's
The issues is when I access from WAN 70.140.200.54 port 443 HTTPS it does not translate and go to 10.0.1.6. From the router I get counts for the NAT entry. I can ping 10.0.1.6. But it does not route...
View ArticleHardware Firewall Before or After EdgeRouter Pro
I just bought a new WatchGuard Firebox for my house, I know, this is over kill but I'm doing this to learn. There seems to be a lot of mixed opinions on the Internet about whether the firewall should...
View ArticleClik here to view.
Re: Update to 1.9 broke my l2tp/ipsec
I gave up waiting for Ubiquiti to respond/fix this. I tried 1.8.5, didn't work as VPN lan routing was totally inoperable and there was no magic command to fix it. I worked around it in 1.9.0 with the...
View ArticleClik here to view.
Re: Bridge LANS
Hi Thanks for your answer. Basically it was a bad explanation from me. This is what I want to do Scenario1: 2x routers working on an edge switch. R1 handles VLAN100 and R2 -> VLAN200. If R1 goes...
View ArticleRe: ER-X v.1.9.0 L2TP fails if IPSec offloading enabled
I had PM'd the full config to Jordan
View ArticleRe: Ipsec VPN tunnel issues
Sorry the tests I mnentioned in my question were done from hosts. I can ping from hosts on both sides and I can browse workstations from A to B...however not B to A. Thanks again...
View ArticleClik here to view.
Re: PPPOE disconnect - ErX was running fine 8 weeks straight
i m probably very unlucky my issue (according to the isp tech) was actually caused by a faulty connector (adaptor) on the fiber optics line outside of my housebecause of that => the signal was very...
View Article