Re: Simple routing question: route between 2 subnets
Let's stick to the steps I've outlined, login to the camera and change the settings. So I can't login the camera (unless I try a ssh...?) and update fw nor update network settings. Sure you can. Grab...
View ArticleRe: How to Replace config.boot file with new modified version on EdgeRouter...
Hi againthanks for the replySo the 152.115.xxx.xx should be changed into what? The internal net I get - but which one?Which of the ACL have I been mixing wrong?Really appreciate your help - and I am...
View ArticleRe: ERL Random reboots
Which is the thread in question? I searched and found a couple but nothing relating to v1.9 yet
View ArticleRe: ERL Random reboots
IIRC, it has v1.8 in its title, but it has been established in this thread that it is not specific to a version of RouterOS (this is it:...
View ArticleRe: IPSec site-to-site with L2TP
What firmware is the ER on? When you say the client side wanted to do VPNs again, does that mean that the clients behind the ER fail to connect to another L2TP server? Where is this server? It might...
View ArticleRe: Edgerouter POE with Unifi APs
Hi there, That's surely possible, as it's exactly what I have done.I'm using an EdgeSwitch-24-Lite in combination with an EdgeRouter-PoE and 2 Unifi AP AC Lites. My router has been configured as...
View ArticleRe: Multiple ip address on same WAN interface with dhcp
This is working, I get public ip addresses for the pseudo-ethernet interfaces. Now I just have to work out how to work with them, route everthing right and so on, but that is for another post if I will...
View ArticleRe: Static route not working
did you get the messege i sent you with the firewall in ?
View ArticleRe: Static route not working
Hi Yes I got it but sorry that is still the output from operational mode. Can you type:configure show firewallIt might be best to see "show configuration | no-more" from operational mode (before...
View ArticleRe: How to Replace config.boot file with new modified version on EdgeRouter...
whatever "inside" address you're trying to hit, for example 192.168.1.101
View ArticleRe: ERPro-8 issues with NAT and/or Bridging
Hm ... given that they're all routers, it doesn't seem like the best approach ... but I don't know the intracacies of your setup, so can't really say more. post your config, and we can take a look at...
View ArticleRe: Using an EdgeRouter X or Lite for redundancy of an Edge Router Pro ?...
in your test lab, you can always change eth6/7 to eth4/5 eth3/4 (assuming you're not using all 8 ports of the ER-8, of course). edit -- oops, eth4/5 would be for the ER-X-SFP
View ArticleRe: Edgerouter POE with Unifi APs
ecriswell wrote:Others seem to come to the conclusion that software bridging is required to have switch0 and eth0 on the same subnet.Don't do that. There's nothing wrong with a simpleeth0 = WANeth1 =...
View ArticleRe: Using an EdgeRouter X or Lite for redundancy of an Edge Router Pro ?...
ClaudeSS wrote:Yes! I do this all the time. Just make sure you don't use eth6 and eth7. Don't have ER-Pro ...so I'm curious, what's so special about eth6/7?
View ArticleRe: Using an EdgeRouter X or Lite for redundancy of an Edge Router Pro ?...
BranoB wrote:ClaudeSS wrote:Yes! I do this all the time. Just make sure you don't use eth6 and eth7. Don't have ER-Pro ...so I'm curious, what's so special about eth6/7?the ER-X doesn't have them...
View ArticleRe: Need to Send All Traffic Through vti tunnel (IPSEC VPN)
Here's the dump from the vyatta-commit.log: [ system ntp ]Starting NTP server: ntpd.[ service ssh ]Restarting OpenBSD Secure Shell server: sshd.[ vpn ]net.ipv4.conf.vti0.disable_policy =...
View ArticleRe: Config: Microsoft Azure route based VPN
THANKS for this! Huge help in getting my S2S VPN tunnel up and working. Any chance you've gotten it working with BGP yet? my virtual networks change quite often in Azure and it's a giant pain to keep...
View ArticleRe: BGP & IPSec questions
Thanks for the tip! Ok so here's what I've done to get past the VTI struggles (I'll admit this is the first I've used them): I've fallen back to my original setup of just an IPSec VPN on the primary...
View ArticleRe: ERL Random reboots
adamjparker wrote:Which is the thread in question? I searched and found a couple but nothing relating to v1.9 yetThat's a long story, you also can put v1.9 in the name of this thread you already...
View ArticleRe: Need to Send All Traffic Through vti tunnel (IPSEC VPN)
changing to next-hop-interface vti0 didn't fix the problem... Here's the full dump of my config.boot file: firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable...
View Article