Edgerouter X and VLAN Setup
I have two questions - So I have a EdgeRouter X configured with 1 WAN and 1 LAN: eth0 - WAN porteth1 - 192.168.1.0/24 - Desktopeth2 - 192.168.1.0/24 - Unusedeth3 - 192.168.1.0/24 - Raspberry Pi...
View ArticleRe: Need help getting FIOS internet connection to work w/ Edgemax
I would either unplug the eithernet or unplug the power from the ERL. I assume disabling the interface for 2 hours would have the same effect, but not sure.
View ArticleA Little help with a setup
Hello, I've searched for how to do this high and low so I figured I would make a post. I have a client that has 2 WAN connections (one for staff and the other for children) that supplies Class C...
View ArticleRe: VPN (static) route issue
For one of these sites, it's USG (at remote site) to EdgeRouter (at core site) - I'll need to setup VTI on both the USG and EdgeRouter, or just the EdgeRouter? The EdgeRouter is where the routing to...
View ArticleRe: Letsencrypt SSL support for Edgerouter
There is no "official" method, but search around the forum and you'll find it has been discussed a lot. This thread looks promising:...
View ArticleRe: Edgerouter X and VLAN Setup
VLANs may be interesting, in your case, only if you plan to use VLANs as well on the UniFi AP, in that case, you may play with the switch vlan-aware, otherwise, is simpler remove the interface eth1...
View ArticleRe: restarting OpenVPN tunnel
I tried this and for whatever reason it didn't work. Thanks for the idea, I thought it might work.
View ArticleClik here to view.
Need help setting up a VPN
Hi guys, I need some help setting up a VPN between 2 Edgerouter X.I have a static ip in location 1 and I have a PC in location 2 that needs to connect to the internet withthe static IP from location...
View Articletrying to configure EdgeRouter-PoE for persistent L2TP/IPSec connection
First off, new owner and am digging my EdgeRouter, so far. I'm looking into the ability to protect my home connection using a VPN service (PureVPN) and so I'm trying to figure out how to configure my...
View ArticleRe: Edgerouter X and VLAN Setup
You didn't specify what you use for the UniFi controller. Unless you already have a Cloud Key, I recommend you run the controller on your Raspberry Pi. Concerning VLANs, you can create one for guests...
View ArticleRe: Need help setting up a VPN
Assuming that the VPN is up and running, you have to use the PBR , dont' foget the static route on the VPN server or a nat rule VPN client, otherwise, the VPN server won't be able to send 'returning'...
View ArticleRe: ERPOE-5 v1.6.0 Download Failed / Interrupted
your config is not that great 1. nuke the bridge2. your DMZ firewall can be made more efficient3. your WAN_* firewalls are a mess. To fix:1. Re-run one of the WAN+2LAN wizards. 2. DO NOT mess with...
View ArticleRe: Need help getting FIOS internet connection to work w/ Edgemax
Unplugged it for two hours and then shutdown the ERL, plugged it back in and booted the ERL (to get a known starting point). Seems to be working now! Going to keep an eye on it for a few days. Thanks...
View ArticleRe: DHCPD Service Fail: configfile interface failed
- Same result for me as unfortunately (no dice). Is there any public acknowledgement of the issue I could reference to inquire about status?
View ArticleRe: Hardware Offloading
I have a similar questionCan hwnat offload work on an edgerouter x, if you have smart qos enabled on wan
View ArticleRe: Hardware Offloading
"Some processes currently can not take advantage of hardware offloading. Traffic on a bridged interface, for example, can not be offloaded on the ER-Lite, ER-PoE, ER-8, ER-PRO, and EP-R8. However...
View ArticleEdgeRouter-X and 802.1Q VLAN Tagging
Hi All, I have an edgerouter-X with ISP coming into eth0 and all other interfaces included as a switch into switch0. EdgeRouter-X================================Main LAN DHCP server is 10.10.10.0/24,...
View ArticleRe: trying to configure EdgeRouter-PoE for persistent L2TP/IPSec connection
A VPN does nothing to "protect" you from "the bad stuff on the internet". All it does is either(a) make you look like you're coming from somewhere else (e.g. Belgium, but you live in the USA)(b)...
View ArticleRe: A Little help with a setup
yeah, it's entirely possible. The LoadBalance wizard would probably be a good start. Best to set each ISP device to "bridge" or "modem only" mode, and let the ER handle NAT for you.
View ArticleClik here to view.
Re: EdgeRouter-X and 802.1Q VLAN Tagging
On the TP-Link switch, the only tagged ports should be ones connected to the router, another managed switch, or a VLAN-capable AP. Tagged port = trunk port (carries multiple VLANs). Don't confuse this...
View Article
