Re: Edgerouter Pro and AT&T Pace 5268AC Fiber Slow WAN
Thank you. Should I be using eth7 instead of eth0? Or does it matter? Also are those commands entered individually, line by line?
View ArticleRe: Edgerouter Pro and AT&T Pace 5268AC Fiber Slow WAN
correct entered line by line, doesn't ,atter what interface is WAN. if your still having issues post your config
View ArticleRe: DHCP Issue and General config overview
Yep, I just realized I'm conflating two different things with A/B/C classifications. Disregard.
View ArticleRe: ERPOE5 connecting switch ports without bridging / connecting subnets
Can you be more specific about what config? Everything is the default other than those basic settings I mentioned in the first post. I used the wizard for Basic Setup from a fresh reset.
View ArticleRe: Kernel version
jms33 wrote:I do agree with @waterside, but as I said it's a divisive topic. It's in the best interest of UBNT, a publicly traded U.S. company, to keep their products secure. Sure, that by itself...
View ArticleRe: Kernel version
waterside wrote:dpurgert wrote:I think the word you're looking for is "it's an embedded platform running on a customized ASIC..." but otherwise, spot on.To be technical, it is a customized SoC...
View ArticleRe: VPN Internal Route Not Working (Determining Packet Destination)
Better not use next-hop-interface on eth port. Without seeing your full config, my best guess is the solution is in link below. Focus on LAN-to-LAN Exclusion...
View ArticleRe: What are the recovery options on a EdgeRouter X?
I'm no expert, but it sounds like that's a physical problem with the flash, like said.As far as I know, flash problems aren't fixable, and bad blocks can't be remapped like on a hard drives - at least...
View ArticleRe: Setup Edge Router X
No, it did not. I had to give up this and are now using the modem in bridge, and run internet through the ASUS AC3200.TV-signales are on cabel directly to the modem. This works fine.
View ArticleRe: Kernel version
dpurgert wrote:jms33 wrote:I do agree with @waterside, but as I said it's a divisive topic. It's in the best interest of UBNT, a publicly traded U.S. company, to keep their products secure. Sure,...
View ArticleRe: What are the recovery options on a EdgeRouter X?
At this point, if there are really bad blocks, any additional effort/time to fix it will be much more than new unit. ...but it was great thread, I'm sure we'll use it in the future for reference (I'm...
View ArticleVPN Works after restart router
Hey everyone...I have an ER Lite running 1.9.1 and have an L2TP VPN set up that I can access via static public IP. I cannot connect to it remotely unless I restart the router. Any idea why it would...
View ArticleRe: QoS not working?
Seems like you didn't specify queue type.Also add priority to the classes, so DSCP46 takes precedence over other classes
View ArticleRe: QoS not working?
I took it directly from their instructions here:https://help.ubnt.com/hc/en-us/articles/205198380-EdgeRouter-Quality-of-Service-for-Voice-Over-IP-QoS-for-VoIP- What other commands do I need to setup?...
View ArticleRe: VPN Internal Route Not Working (Determining Packet Destination)
I've tried various ways, besides next-hop and none of them work. What I want is for packets that come to eth2 that are destined for 192.168.157.0/24 to 192.168.0.9 which is also on eth2. Are you...
View ArticleRe: VPN IPSec for iOS
Anyone have this issue?I can't keep alive the vpn connection for 8 hours?
View ArticleRe: What are the recovery options on a EdgeRouter X?
, & (for the moral support about not giving up). Thank you.It's been a great learning experience, and your skills and patience are really quite something - people like you make this community...
View ArticleRe: VPN Works after restart router
I should also clarify, that after a restart, I can connect for a few minutes, then I get a message on my client saying I'm disconnected. I then cannot re establish a VPN connection unless the ER Lite...
View ArticleRe: VPN Internal Route Not Working (Determining Packet Destination)
This may be a long shot, but do you have lb-local enable or disabled? If it's enabled try disabling it and see if the issue is still there (lb-local is buggy). That said, it would be best to post your...
View Article
More Pages to Explore .....