Re: NAT setup for 2WAN+2LAN
I couldn't get it working before as only tried Interface Addr eth1.50 in the sNAT rule. This seems to be working... Ping to google.com worked the entire time--switching between both configurations and...
View ArticleRe: NAT setup for 2WAN+2LAN
1 an interface is just a single IP address, whereas you want to do NAT for the entire subnet 2&3 sNAT is for connections set up inside to the outside world, dNAT is for connections outside to LAN...
View ArticleRe: Why isn't destination MAC address an option in Rule Configuration?
You're right, there's no filtering on MAC-Destination. MAC-Filtering on LAN_IN is sufficient to block your device
View ArticleRe: EdgeMAX EdgeRouter security release frmware v1.9.1.1 has been released!
spom wrote:Hmmm. I just had a ERL die, so was building a new ERP to replace it (with 1.9.1.1) and have been banging my head trying to figure out why I didn't have DHCP working on one VLAN (the...
View ArticleRe: NAT setup for 2WAN+2LAN
1) To setup port forwarding for :443 and 10.93.254.30 for example, I would need to create a dNAT rule like this?: inbound int: eth0translations: 10.93.254.30, port 443All protocolsDestination Address:...
View ArticleRe: Serial Console ports on EdgeMax EdgeRouters are unreliable and corrupt data
I have many edgerouters typically connected via something like this: https://www.amazon.com/gp/product/B00RHDXDWA/. Some cases have the serial extended as far as 25 meters over Cat5e. I don't have...
View ArticleSudden issues with load balancing ER-Lite
I have been load balancing 2 WAN links on my Edge Router Lite since I purchased it around 9 months ago.After initial issues with my configuration, fixed with help from this forum, everything was...
View ArticleRe: Serial Console ports on EdgeMax EdgeRouters are unreliable and corrupt data
Over a year ago we started to use ER, and I also noticed serial to be more prone to errors than I was used with Cisco products.I guessed 115200 was just more error prone than good old 9600,n,8,1...
View ArticleRe: PowerBeam 5AC 500 with EdgeRouter X
The problem has been solved by checking the "Proxy ARP" box in switch0 config. Once enabled, and a DHCP server added to switch0, all routing is working flawlessly. cheers,
View ArticleRe: EdgeRouter X SFP - Trunk port
I doubt all ports will use VLAN102. Only port5 does. Other ports are probably behind NAT, and need to use another VLAN like VLAN1 Build upon thisset interfaces switch switch0 description SWITCH set...
View ArticleRe: Do OpenVPN files remain after a reset?
afaik, factory reset clears /config folder. (just try....) Moreover, when you perform an upgrade, each system image has it's own /config folder. I doubt if on reset they're both cleared. So that...
View ArticleRe: Do OpenVPN files remain after a reset?
I will try when I can get my hands on a spare to test with at the office next week. Right now searching for a commonly known way of handling this issue. I read a little about what happens during an...
View ArticleRe: Firewall questions
Hi AlexThanks so much for the interest, I do appreciate it. However, I left that location (my primary home) for France just a day after my last post, and have not yet returned. I am unable to access...
View ArticleRe: Hopefully Simple DNS Question
This helped clean things up a bit, but I still have no local DNS resolution. On my old router, it automatically mapped hosts to <something>.home, which is sort of what I'm looking for here. Here...
View ArticleRe: Modify TTL
This is pretty easy in vanilla linux. How can I make this work on the ERL with it's modified iptables?
View ArticleRe: Serial Console ports on EdgeMax EdgeRouters are unreliable and corrupt data
16again wrote:Over a year ago we started to use ER, and I also noticed serial to be more prone to errors than I was used with Cisco products.I guessed 115200 was just more error prone than good old...
View ArticleRe: EdgeRouter X SFP - Trunk port
Thanks for answering. I see you write 101 description internet. 101 is IPTV , 102 is Internet. Should I change 102 to 101 for all ports or are only the two last lines wrong? I get "Error: can not have...
View ArticleRe: Beta access not working
Hi All, I have fixed everyone's account up to my post here. If you still have issues please let me now by tagging me. Thanks,David
View Article