Re: EdgeMAX-X site-to-site vpn
post your config afaik, on Zyxel, you need to add (zone based) firewall rules allowing LAN -> VPN and VPN ->LAN
View ArticleRe: local dns problems with dnsmasq
Hi, I had a similar problem: Some clients did not send a proper hostname. The result of 'show dhcp leases' looked like that: IP address Hardware Address Lease expiration Pool Client Name ----------...
View ArticleRe: EdgeRouter X SFP or EdgeRouter PoE, which router will work on my network?
In my country CAT6 is really expensive, a single keystone/conector of CAT6 is 5x more expensive than CAT5E, 305 meters of cable is also 2X more expensive, I didnt even found CAT6A for sale. But how...
View ArticleEdgerouter Lite renewing WAN DHCP IP every few minutes
I've been using ERL for sometime now, and I'm pretty happy with all the Ubiquiti products (Edgemax, Edgeswitch, Unifi Switch, UAP-AC-Pro's, Cloud Key, NVR, G3 cameras etc). Ran into an issue for the...
View ArticleDuckDNS updates over HTTPS instead of HTTP?
Hi all, I'm switching from Dyn to DuckDNS and I have DuckDNS currently working. My config is below. service custom-duckdns { host-name asdfasdfasdf login nouser password...
View ArticleRe: UDP packet loss with EdgeRouter Lite
Yeah, I know. I was being grumpy. this whole thing just made me look bad to a big customer and tarnished the Ubiquiti name (not ready for the big time). 10mbps of udp isn't just certain conditions...
View ArticleRe: Edgerouter X configuration with Comcast modem/router
You are right about that. I figured all the addresses needed to be in 10.0.0.x format to talk to each other and the main Comcast router, which is the DHCP source. I have not changed the DHCP default...
View ArticleRe: EdgeRouter X SFP or EdgeRouter PoE, which router will work on my network?
On consumer routers like the Archer C9, there are typically 1 WAN port and 4 switch ports for the LAN. The Edgerouters are not like that. They are more configurable. For example, the EdgeRouter Lite...
View ArticleRe: BUG: DPI Categories Messed Up
So I figured this out. using a space " " in place of the "-" works. Well at least it saves and continues. I have yet to see it actually record activity in the firewall stats.
View ArticleRe: ER-Lite config to ER-X
I am only using 2 ports and I am not using hardware offload.So I don't wanna brick my router if I import the config of my ER-Lite? Regards,iLevac
View ArticleRe: Edgerouter Lite renewing WAN DHCP IP every few minutes
Very interesting, could you post your configuration? I don't think this is normal, expected behavior.
View ArticleRe: ER-Lite config to ER-X
Generally, I don't like doing things like that. You can dump the config as commands with show configuration commands | cat Then you can copy and paste selected commands. Beats typing so much but...
View ArticleRe: Setup Problem with Static IP subnet
Ok, still no dice. Turned everything off, then on again. eth0 is green, but I can't ping 8.8.8.8 from the ER. My local LAN is fine - DHCP is working, but I am unable to ping 8.8.8.8 from a connected...
View ArticleEdgeRouter ER-X SFP and ER-X for gaming?
I have a full Ubiquity LAN with a ER-X SFP as my router and various other products around the house. This question only involves my router and a ER-X setup as a switch. How to optimize those two for...
View ArticleRe: Edgerouter Lite renewing WAN DHCP IP every few minutes
Here's my config eth0 - internal (to Edgeswitch)eth1 - unusedeth2 - WAN firewall { all-ping enable broadcast-ping disable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable...
View ArticleRe: Edge router and VPN
You don't need OpenVPN, and Ubiquiti doesn'tprovide it directly. You need a bunch of CLI andsome fiddling. I use the built-in IPSec site-to-site function. It'snot what I prefer, but it works well...
View ArticleRe: UDP packet loss with EdgeRouter Lite
fixed in v2.0 is not acceptable as far as I am concerned ... will now have to consider alternatives. Very disappointed.
View ArticleRe: Edge router and VPN
I managed to make it work without Open VPN, using the built-in PPTP VPN on the router and the Windows PPTP client. How can I get name resolution to work after that? I'm able to ping and access...
View ArticleRe: Edgerouter X configuration with Comcast modem/router
Hang on, let's back this up a bit. What exactly are you trying to do? What function do you want the ER-X to serve?If you just want to give network access to a few other devices, then a switch would...
View ArticleRe: Edgerouter X configuration with Comcast modem/router
Also, a picture showing exactly what equipment you have and where it's plugged in will help.
View Article
More Pages to Explore .....