Re: Edge Router Pro Fan Status?
I'm not seeing a fan status on my pro running 1.9.1 Only cpu, memory, power and temperature. show hardware temperature Temperature: Board (CPU): 37C CPU: 61C Board (PHY): 37C PHY: 66COffhand I don't...
View ArticleRe: Edgerouter X SFP issues after power failure.
So I tried just changing the interface for my firewall rules from eth3ð4 to switch0. When I tried to recover that config, it did the same thing unfortunately. I ended up having to start over...
View ArticleRe: Automatically send WOL (magic packet) when accessing server over...
Hey pheyx!the pkill command gives out this:Traceback (most recent call last):File "/config/scripts/wake.py", line 55, in <module>server = SocketServer.UDPServer((LSN_HOST, LSN_PORT),...
View ArticleRe: Edge Router Pro Fan Status?
Yes, the fans blow out the back, that's the default. I got better temps after reversing them (turning them inwards), but they were still too noisy.
View ArticleEdgeRouter X PoE Out on Eth4 to power a Netgear GS108T-200NAS
Hi all, I want to confirm one thing about EdgeRouter X PoE out on Eth4. The EdgeRouter X came with a 12V power adapter and based on my reading, that is not enough power to deliver power a device on PoE...
View ArticleRe: Automatically send WOL (magic packet) when accessing server over...
Hi makromorphago,LSN_PORT is 8443(no quotes),not '8443' .
View ArticleRe: Comcast IPv6 issues when hwnat enabled on ER-X
I hope the ubnt guys will take you up on your offer.I have had no luck with my edgerouter x + hwnat + ipv6 with residential Comcast. ipv6 works fine without hwnat.
View ArticleRe: Automatically send WOL (magic packet) when accessing server over...
Hey pheyx!Well I tried both, first without quotas. Now again without.Whatever you did with me now. It finally worked.I changed eth3 to switch0 in the port forwarding and your py script. You did a great...
View ArticleRe: EdgeRouter X PoE Out on Eth4 to power a Netgear GS108T-200NAS
The Netgear takes 802.3af power on port 1.The ER-X POE only puts out passive POE.Won't work. You could strip off the 24V passive POE with a gigabit POE splitter, feed that through a 24V -> 12V...
View ArticleRe: Automatically send WOL (magic packet) when accessing server over...
hi,makromorphagoglad to know it is working now, congratulations!
View ArticleRe: OpenVPN works - but not with easy-rsa certs
Success. The original working config wth the CA created on the EdgeRouter had a CA cert with all this additional "header" information before the BEGIN CERTIFICATE part. So when I created a new CA on...
View ArticleRe: VRRP vs OSPF
With VRRP I have good redundancy ( load-balancing the network traffic, between routers, is not necessary but I do it anyway ).To be honest I had a look on the UBRSS training guide and I read that most...
View ArticleRe: Advanced Queue Web GUI not showing leaves
If that is all it is then i am very embarrassed!
View ArticleRe: Advanced Queue Web GUI not showing leaves
Yep, I am embarrassed. I clicked a lot on the text but never on the dot. That seems to do the trick! Thanks for the answer and more kudos to you.
View ArticleRe: Best way to learn?
There are some great suggestions here, and some useful training resources I wasn't aware of. It'll take me a while to go through these and find the stuff useful to me, but there's clearly a lot...
View ArticlePower 5 Antennas with Edgepoint R6
What POE i need to power 5 PBE-5AC-400 or some PBE-5AC-400 with some litebeam AP or 23AC ?Thanks
View ArticleRe: Power 5 Antennas with Edgepoint R6
In general, each radio requires between about 5 and10w of power. Any of Ubiquiti's PoE switches shouldeasily handle that, and you can also use the providedPoE supplies as well. Please refer to the...
View ArticleRe: Severe OSPF problems on 1.9.1
Any updates? I meanwhile switched the EP-R6's to Debian Quagga 0.99.22.4 (mipsel) instead of the provided ZebOS OSPF and it's working fine with no issues whatsoever. It's not integrated into the rest...
View ArticleRe: Route Public IP to Client for Wisp
Thanks for any assistance here. Below is the real ip story that's handing. backhaulVEdgerouterX sfpWAN 40.13.xx.90-94LAN 172.20.20.1/24VEdgepoint S16 172.20.20.2/24VNano 172.20.20.3/24VClient Nano...
View Article
