Re: PTPP issues
Found the issue - It is a windows 10 problem. Made the PPTP in the firewall (local), and everything is working fine. Use the Win for Radius:-)
View ArticleRe: ISP WAN Block IPs and LAN IPs Setup in EdgeRouter
ok had some extra time to get back on this project. could use some help on setting this up. eth0 = WAN Block ISP = xxx.xx.xxx.12/30 - 14 my XO WAN IPeth7 = Trunked Porteth7.20 = local LAN =...
View ArticleImportant missing functions
Why are there so many important missing functions in the Edgemax pro router?We need the following - In route-map it's not possible to set community to {32-bit ASN}:XXXX - IP unnumbered - VRF - QinQ...
View ArticleRe: ER-PoE port forwarding 2nd VPN connection
On my router, it's as you describe, but after you click Add IP, you can choose DHCP. Your plan makes sense to me.
View ArticleRe: L2TP VPN config - today's puzzle!
ok - I went ahead and reset my Edgerouter and reconfigured it. I decided to follow goldlineIT's approach, where I did a "show configuration commands" to get the full list of settings before I reset...
View ArticleRe: UDP NAT Problem
I appreciate your help. I have configured the router as you have suggested but with the same failed results. Your not running any VoIP modules that could be recognising port recognised VoIP port.
View ArticleRe: ERLite & VoIP?
if you are actually smart enough to write solid restrictive rules, then you would not have to ask this question. So tell us what you copy/pasted from random threads to "secure" your system and then...
View ArticleRe: Multipath TCP for faster connection
hate bumping old thread but this would make me switch from pfsense https://github.com/ovh/overthebox
View ArticleRe: DDNS host name to route to internal address
My concern is not accessing my routers gui, or any other service, via public address or DDNS. However, we have a surveillance web service that I am trying to get to via public address or DDNS....
View ArticleRe: Prevent the Inter-VLAN routing
UBNT-stig's response worked for me, but broke hairpin port forwarding. Here's what I had to do to partition two vlans (eth1=192.168.3.1 and eth2=192.168.4.1). set firewall name FILTER_ETH1_NET...
View ArticleRe: DDNS host name to route to internal address
I believe I found the issue in another post. The bridging interfaces do not play well with hairpin nat. Correct me if I am wrong. Going to test this on one of my sites tomorrow. Thanks!
View ArticleRe: Edge Router and DPI / Unifi 5 Are we missing out?
Yep I'll give this a bump as well, as I arrived here thinking the exact same thing. Look at all those gorgeous graphs etc, in what appears (at least cosmetically) to be a much more powerful DPI...
View ArticleRe: masquerade - sites do not load
What's the output of "show ip route" ?Since OSPF is involved, you might receive routes that mess up internet access
View ArticleRe: ISP WAN Block IPs and LAN IPs Setup in EdgeRouter
The masquerade rule will NAT all internal addresses, including the public DMZ range.Exclude those addresses from being natted: use !xxx.xxx.xxx.16/28 as source on the masquerade block , or create a...
View ArticleLooks wierd in System Log monitor
Mar 17 07:25:02FiskKompaniet dhcpd: uid lease 192.168.0.237 for client xx:xx:xx:xx:xx:xx is duplicate on FiskKompaniet I keep getting these over and over on my EdgeRouter PoEv1.9.1.It seems like it's...
View ArticleRe: Edge Router and DPI / Unifi 5 Are we missing out?
I think UBNT has given the anwser with UMNS for EdgeMAX devices.
View ArticleRe: Edgerouter OpenVPN
Sorry for the late answer, netstat on the edgemax shows the following: bm@fw01# netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default xx-219-168-1.dc...
View ArticleRe: Edgemax Er-x Router nooby
Morning, so what I would need to do it reset my draytek vigor 130 modem and set the modem in as a bridge and reset the edge router and do the wizard again. There is no isp custom firmware I the modem...
View ArticlePLEASE HELP - EDGEROUTER Pro - dual Wan - dual NAT
Please Help!Have Edgerouter pro - from WAN 1 --> NAT TO IP PBX br2 (192.168.10.3). All work ok.But need double NAT - also from WAN 2 --> NAT TO IP PBX br2 (192.168.10.3) How can i do this? (may...
View Article
More Pages to Explore .....