Re: Failing Setup for Centurylink Fiber
OK, sorry for the delay in getting back to everyone but I had some meetings in SoCal to attend . so I tried this before I left (also learned there in no pasting in the CLI) still to no avail. If all...
View ArticleRe: DNS Forwarding from one Network to Another and Vice Versa
Hi goldlineIT, I think you misunderstood me. I have no DNS forwarding set up on the nanobridge antennas. The nanobridge antennas are in bridged mode and act just like a cable between the two routers.
View ArticleClik here to view.
Re: Setting up DHCP with option 156 not picking up the correct IP address
I'm glad you got it going!! yeah, you needed the layer2tagging. Its been so long I posted and no one replied. Its good that you got it firgured it out and whoever need help can come here thanks
View ArticleRe: Setting up DHCP with option 156 not picking up the correct IP address
That's why I posted the answer. Hoping it will help someone else down the road. Thanks for asking the question, it helped move me in the right direction.
View ArticleRe: Edgerouter X - vlan without a switch config included
(You might only be able to set PVID's on switch0) I am not sure though.
View ArticleRe: Can't establish Site-to-Site VPN
No additional firewalls and both locations have a single static IP address
View ArticleRe: Can't establish Site-to-Site VPN
pjsockett wrote:No additional firewalls and both locations have a single static IP addressRoutable? What kind of CPE and ISPs do you have?
View ArticleRe: EdgeOS Blacklist script
Now I know why your were so salty! I just ran into your blacklist script and I got to say It's my new favorite. Very nice. Do you have any plan's of adding a whitelist as well? and do you plan on...
View ArticleRe: EdgeOS Blacklist script
Also I am not sure why people are applying the blacklist's to the entire firewall as its waisting resources. You only benefit from it if you have ports open to the world. Your firewall already drops...
View ArticleRe: Configuring DMZ Firewall Rules
I have seen that diagram before but it still doesnt make sense. Does anyone else have an example of how they have their DMZ Setup?
View ArticleRe: Edgerouter X - vlan without a switch config included
Can you explain what you're trying to accomplish? How many subnets are you trying to use?
View ArticleRe: IP Address on Edgerouter POE - TBD
Post your configuration. If you set each port to use DHCP you're doing it incorrectly - This tells that interface to try to pull an IP address from whatever you connect the router to. The point of...
View ArticleBlock OpenSource PSiphon
We have a problem that a lot of users are using PSiphon (VPN) to visit blocked websites and use blocked applications. I really can not find a way to block this app, even if I only open port 80 the app...
View ArticleRe: Block OpenSource PSiphon
PSiphon uses ssh and L2TP/IPSEC. Make a firewall rule that deny's match ipsec "set firewall name evilcorp_blockcoolstuff rule 10 ipsec match-ipsec"For ssh i would do a tcpdump and see what destination...
View ArticleRe: Block OpenSource PSiphon
Also I would give DPI a try it has a category for proxies. I am not sure how the performance is for that though, so if you try it report...
View ArticleRe: Edgerouter X - vlan without a switch config included
What i am trying to do was to leave the isp router on its default ip of 192.168.1.1 and have wifi run from that IP range. Then from port one of my isp router to the edge router set up a seperate...
View ArticleRouting
I have been using UBNT for many years now and love it. I have told a friend I would help them with a project that I will describe and maybe someone can give me a insight on what to do to facilitate...
View ArticleRe: HTTPS Certificate Error - Finally Put to Rest!
So many thanks andrewiski !!!! Worked like a charm using a PFX wildcard certificate exported from our Microsoft IIS. Very clear and simple. Using UBUNTU Server 16.10 x64 with Unifi controller 5.4.11...
View ArticleRe: Edgerouter X - vlan without a switch config included
Mwitt wrote: What i am trying to do was to leave the isp router on its default ip of 192.168.1.1 and have wifi run from that IP range. Then from port one of my isp router to the edge router set up...
View Article
