Re: Encounter Big Issue With Edge Max Router X
At least it does got me thinking where the X stands for.Trekkies might come up with:neXt generation ?
View ArticleRe: IPSEC Site to Site with FQDN doesn't work in 1.9
I was about to update all the routers tonight and found this post, did it get fix? [IPsec] Fix configuration issue where extra "%any" is generated in IPsec secrets file. I saw this in the changelog of...
View ArticleRe: resolving router by hostname (when router is servicing name resolution)
At least adding hostname not equal to system name works on ERL: set system static-host-mapping host-name erl.test.local inet 192.168.2.1 /etc/hosts:admin@ERL:~$ cat /etc/hosts 127.0.0.1 localhost #...
View ArticleRe: ERLite-3 Forwarding port 8443 on router but only to certain subnet
Rule seems OKBut how did you change the GUI listen port?-By hardcoding the port, rule should be fine. -By NATting, you should still allow port 443
View ArticleOSPF equal cost now working/setup right
We connected our first redundant backhaul and while OSPF is advertising the secondary route to the rest of the network, it doesn't seem to pass any traffic with the cost set equal on all routes. The...
View ArticleRe: EdgeRouter and PS4 Network
I eventually solved it by cloning the MAC address on the EdgeRouter, which then allowed it to acquire a new IP from the modem.
View ArticleRe: 4g Failover hardware options
My experience with Cradlepoint hasn't been great (MBR95 and MBR1400). Slow to switch on failover and the wifi disconnects frequently at times. Peplink Balance 20 does not have any of these problems and...
View ArticleRe: DHCP-Server "groups" on a single subnet/vlan?
Add dhcp reservations, and add special options to individual reservations.
View ArticleIPSec Site-to-Site not working after upgrading to FW 1.9
After upgrading to FW 1.9 on my EdgeRouter Lite, the Site-to-Site VPN won't come up. Tried to downgrade back to 1.85 - but I'm still unable to get the VPN up and running. I tried deleting the VPN and...
View ArticleRe: ER-X - initial setup - Stateful Firewall settings not necessarily...
"Not necessarily recommended" because the example config may not fit all needs. It's probably fine for home use and many other uses, but it may not be the best config for all uses. There is no way...
View ArticleRe: IPSec Site-to-Site not working after upgrading to FW 1.9
After allowing ICMP using this guide, I got the VPN up and running:https://www.youtube.com/watch?v=hTFqZAZeDqQ
View ArticleIPv6 for Guest network.
I've gotten IPv6 to work on my private network to work but couldn't do so on my Guest network. Both of them have IPv6 address assigned to them when I type in 'show interfaces'. I've used the same...
View ArticleRe: 1.9.0 broke dashboard for me (using Firefox)
I am seeing the same issue when using Firefox 48.0 on my Windows7 machines. Under Users it shows an inactive session.
View ArticleRe: DHCP-Relay annoyances
16again wrote:@SPITwSPOTSRe-read post 3 in this topicMy apologies. I should have mentioned earlier. That's the first thing we tried before starting this thread. Cause that would be the easiest thing...
View ArticleRe: ISP IP Passthrough
Why pass-through? You want to hook up a pfsense box....then hook it up directly. Also, what is config of provider modem you want replaced? (single pppoe with nat, pppoe with routed subnet....)
View ArticleRe: ISP IP Passthrough
the config my isp: FTTH, I get the ipv4 address on the VLAN 10. (this is the address I want to spend the firewall). I know I can use pfsense to which he attributes the address, but I want to use the...
View ArticleRe: DHCP-Relay annoyances
2 suggestions: First suggestion Try the new dnsmasq implementation in 1.9.0, instead of the ISC DHCP. Hopefully it won't have the same requirement to force it to take effect. Those kinds of issues are...
View ArticleRe: EdgeRouter with OpenVPN-client using NAT
I did some digging. The OpenVPN appliance sends what networks to NAT to the Edgerouter, but it doesn't seem to add them for some reason.
View ArticleRe: DHCP-Relay annoyances
2nd suggestion. "Any way to effectivly restart the service with out actually deleting the entire dhcp-relay config, commiting, and re-configuring? (or rebooting)" I think maybe you haven't realised...
View Article
