Re: New to Ubiquiti. ER-X will not connect to net
Dave-D wrote:Right: and as I recall, WAN+LAN2 does this funky thingwhere port 0 is no longer the WAN port. That is contraryto nearly all consistent setups, and confuses everybody. I'm still not at all...
View ArticleStuck on ER POE-5 Failover WAN website connection issue
I'm a bit stumped by this. Have ER POE-5, running 1.9.0. Failover WAN config with Comcast as primary on eth0, Cradlepoint Verizon LTE backup on eth1. When I test a failover (by disconnecting cable...
View ArticleRe: dyndns.org: badauth and Invalid Value for keyword 'ip' = ''
The missing IP address isn't good - you aren't double-NAT on eth1 or anything, are you? What is the output of: configureshow service dns dynamic ? *PLEASE* scrub out passwords before you paste here!...
View ArticleVPN with Radius
I attempted to configure a radius server for VPN authentication (L2tp). My server is logging an error rlm_chap: clear text password not available. As a test I was able to configure radius for...
View ArticleRe: Compatability With IOS / Android
Acces to Cloud Key works fine when you enter the ip of de Cloud Key in the browser of your iOS device to start the web GUI. You can even start the controller from that webpage and configure it in the...
View ArticleRe: Compound NAT solution?
So.....this works for one router and one UUT, but it doesn't work when I hook up the whole system: one router with a different IP up to each of the computer's 8 NICs. I tried assigning different...
View ArticleERP Flip the failover from eth0 -> eth1 to eth1 -> eth0
Anyone done this with success? I thought it would be as easy as changing the Load Balnce group.I got a new line today with faster speed and wanted to make it my primary. I tried this with no success...
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
Hey gents. I have made some progress. Running cat6 from main tv modem to remote unit didn't work. However I have just looked up MoCA after seeing it listed in the network connection pages of the...
View ArticleER-X multiple sflow servers - crashes flow-accounting
flow-accounting keeps crashing, and I see the following with show log all: Feb 16 16:09:09 PronetNationalRtr1 pmacctd[5136]: ERROR ( 192.168.10.99-6343/sfprobe ): plugin_buffer_size is too short. looks...
View ArticleRe: How do i access modem on eth0(WAN) from eth1(LAN) (wan is configured for...
(replying to ) Previous isp used PPPoE, and in this case it 'just works' as you mention without any special config.Now Aussie NBN conbnections typicaly use IPoE in which case the WAN interface works a...
View ArticleRe: How do i access modem on eth0(WAN) from eth1(LAN) (wan is configured for...
Many thanks.It's hard to explain things online to people you don't know. If you're explaining something to a pro in intricate detail you might be mistakend for being a smart ass.On the other side of...
View ArticleRe: How do i access modem on eth0(WAN) from eth1(LAN) (wan is configured for...
Today I ran tcpdump while accessing my modem just to check. I also tried with a few other RFC1918 ip addresses. It appears my supposition was correct. RFC1918 is not treated specially. The normal...
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
Have just gotten off the phone with tech support at Cogeco. They spent quite some time trying to reestablish Tivo. Cogeco had to defer to a service call Saturday morning as a tech is physically...
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
Didn't you already run the WAN2LAN2 wizard I advised?If so, follow my other directions to change one port toanother subnet--if you really need that at all. Dave
View ArticleRe: Help A Newb Configure OpenVPN for VPN Service
I thought I'd come back and update the thread mostly for the benefit of others treading the same ground. I had a bit of trouble getting it working, but finally got there, hopefully this helps others....
View ArticleEdgeMAX Feature Roadmap?
Hi all, Is it possible to get a Feature Roadmap like there is for UniFi?I'd like to know what UBNT is working on when it comes to fixes and/or new features with possible ETA's for the EdgeMAX/EdgeOS...
View ArticleRe: EdgeRouter X - WAN + CoreSwitch (Switch0) + Distribution Switches
Greetings, Unfortunately the ISP doesn't support IPTV when the router is in Bridge mode, so I'll have to stick with the previous configuration you guys helped me fix. Now I would like to have the...
View ArticleRe: EdgeRouter X - WAN + CoreSwitch (Switch0) + Distribution Switches
is it that the bridged CPE isn't passing along the IGMP stuff to the ER, or ... ?
View Article
