VPN cannot ping devices
Hey folks, Ive trawled through here for 2 days and i cannot seem to get this working. I've established a site-to-site VPN using the config here:...
View ArticleRe: edge router 8 ER8 freepbx and port forwarding not working
this is what it is at the mo firewall { all-ping enableipv6-receive-redirects disableipv6-src-route disableip-src-route disable log-martians enabledefault-action dropdescription "WAN to internal"rule...
View ArticleRe: Edgemax with Google Fiber and TV
sjjenkins wrote:jonboy345 wrote:sjjenkins wrote:That's weird... your config looks ok at first glance. What happens if you disable all the firewall logging?Sorry for the delayed response, out of...
View ArticleRe: Need help clearing space
See how full /tmp is with df -h Maybe delete something there.
View ArticleRe: VPN cannot ping devices
Post your sanitized config in a spoiler tag. Also post output of /sbin/route -n for each side. Do you have routes on each side for the other side's subnets?
View ArticleRe: Help With Routing /27 through /31
Got it! Ok, here's what was required: eth0:enable proxy ARPeth5:enable proxy ARP? <- not sure this was completely necessaryconfigure /29 subnet interfaces (use first /29 IP for each subnet, except...
View ArticleBarebones config, no NAT, no Firewall, no nothing and I can't make basic...
Hi,Part of a site to site VPN project between the head campus and a small branch (6 employees) using public address subnets, I need to build my config from the ground up, and I am a newbie on the...
View ArticleTroubles with Cisco terminated VPN to EdgeRouter X
New EdgeRouter user... though I've been scouring the forums and other resources prior to attempting to establish the VPN today with our telco vendor. It seems I've gotten close... but not close enough....
View ArticleRe: Need help clearing space
Let's see if this copied: Filesystem Size Used Available Use% Mounted onubi0_0 214.9M 116.9M 93.3M 56% /root.devaufs 214.9M 116.9M 93.3M 56% /devtmpfs 124.4M 0 124.4M 0% /devtmpfs 124.5M 112.0K 124.4M...
View ArticleRe: Barebones config, no NAT, no Firewall, no nothing and I can't make basic...
Get rid of the "protocols static interface-route" and use next-hop instead.Also your routers' eth0 aren't on the same network. subnet
View ArticleConfiguring DMZ - Config Verification and Recommendations
I'm working on a segment that incorporates a DMZ hosting a webserver. The general use case is the following: Webserver can communicate to the internet via 80,443Webserver can communicate to internal...
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
That's completely correct! But you don't need to re-runthe wizard to change the LAN subnet alone. I struggle to understand why you try to use such acomplicated setup for a home installation--when...
View ArticleRe: Need help clearing space
I have an ERL myself, not a 5 port router. Mine has more space. In any case, your /tmp is virtually empty. There have been a number of threads in the past dealing with this issue. You might try to...
View ArticleRe: Need help clearing space
I tried the gui, that errored out but gave me no error. I then tried the CLI interface, which showed me the error. I will do a better search and see what they did, thanks R
View ArticleRe: ER-X SFP: no space left on device
I did not install a single thing. I connected it to the Internet and connected it to my other switch. I then configured my lan to lan, and now.. not enough space to upgrade from 1.1 that it came with...
View ArticleRe: Need help clearing space
I found a post that had the last post that helped. I deleted a squidguard directory then uploaded and rebooted. Thank you very much!
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
You're welcome--I think I've (finally) provided your 'solution'. I had already advised you to use WAN+2LAN2--or should have.In that setup sequence, you can also choose a separate IPsubnet for a...
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
Again, WAN+LAN2 creates two LANs. WAN+2LAN2 creates only one. I don't understand Ubnt's labeling decisions on the wizards. So as not to re-run the wizard, you can also manually remove a port from the...
View ArticleRe: New to Ubiquiti. ER-X will not connect to net
Right: and as I recall, WAN+LAN2 does this funky thingwhere port 0 is no longer the WAN port. That is contraryto nearly all consistent setups, and confuses everybody. I'm still not at all sure where...
View Article