Re: Old EdgeMax Lite - How to reanimation ?
https://community.ubnt.com/t5/EdgeMAX/EdgeMax-rescue-kit-now-you-can-reinstall-EdgeOS-from-scratch/td-p/514857
View ArticleRe: Traffic policy on VLANs
try adding:set traffic-policy limiter client-UL bandwidth (your total bandwidth)
View ArticleRe: ERL + CenturyLink 1gig. Stuck at 100meg
Would this be an issue even if br0 doesn't encompass eth0? I'm going to remove bridging just for kicks, but I would be surprised if this fixes things. Also, all interfaces show 1000m/full. I'll report...
View ArticleRe: ERL + CenturyLink 1gig. Stuck at 100meg
Looks like that did the trick! Never would have thought that bridging would be the culprit. Thanks for the insight.
View ArticleRe: TOP SITES ADULT
They could be used for parental controls, but right now the TopSites categories are all empty, so essentially they don't work. Weirdly many of the top porn sites are listed under the streaming...
View ArticleRe: VLAN to PPTP VPN to Internet
I had the same issue a while back... If you are using DHCP try reserving static IP for windows media center and for all ceton devices.Also in the background have a device ping both - the ceton devices...
View ArticleHelp understanding routes
I have an ER-X set up in my home network as my only/main router as follows: eth0 - WANeth1-eth4 = switch0vtun0 - OpenVPN connection to my VPN provider (I have a LAN address range routed through this...
View ArticleRe: Help understanding routes
0.0.0.0/24 matches ip addresses 0.0.0.xxx where xxx ranges from 0-255. The /24 means the first 24 bits of an ip address must match the first 24 bits of 0.0.0.0. To match all ip addresses would require...
View ArticleEdge Router Lite IPSEC MSS Issue
a moment ago Hey Guys Having an issue with a newly deployed IPSEC VPN between two Edge Router Lites running 1.9.1I have the site to site tunnel up and running and I can pass ICMP traffic between them,...
View ArticleRe: Help understanding routes
Thanks, . I guess I'm confused as to why those entries are in the table and what it means. And ultimately, is it "expected" given my setup.
View ArticleVLAN for Guest Access
Hello. Need some help here.I want to to set up a guest wifi network for my guests, using VLANs. The ideia is that guests could not enter my private LAN, so they will have a segregated SSID. I´m using...
View ArticleRe: VLAN for Guest Access
firewall {all-ping enablebroadcast-ping disableipv6-receive-redirects disableipv6-src-route disableip-src-route disablelog-martians enablename VLAN_Guest_IN {default-action acceptdescription...
View ArticleRe: VLAN for Guest Access
You blocked yourself from dns resolution with your vlan_local rule.
View ArticleRe: Edge Router Lite IPSEC MSS Issue
you can switch it to ipsec with vti. It will make it easier to control the mtu.
View ArticleRe: Split ISP
Get that second router out of the path, or add routesthrough the second router--make it transparent. Dave
View ArticleRe: Edge Router Lite IPSEC MSS Issue
Is VTI the only way to control IPSEC MSS? I have setup a couple of other IPEC tunnels in the past with ERL to Cisco devices and the MSS has always work.
View ArticleRe: Edge Router Lite IPSEC MSS Issue
I don't know the answer to that, but I am sure someone does. Post the config's of both routers sanitized. It's going to be needed for someone to further help you.
View Article
More Pages to Explore .....