Re: simple routing with no NAT between eth1 and eth0
You should not need a static route if the networks are directly connected to the interfaces. You should be able to ping from one subnet to another if the router AND the clients are configured...
View ArticleRe: DPI: Netflix not being flagged
For me, I find that it is usually logged as SSL traffic - I assume it comes in encrypted and so cannot be identified.
View ArticleRe: Very strange ER pro8 behaviour on facebook, instagram and some sites
areba wrote:I am starting to think something weird is happening at the Edgerouter Front.If you suspect the Edgerouter, could you post your config?
View ArticleRe: Losing connection to server using remote desktop
Hello, Sorry for the long reply. I am still having this issue. I have attached the config file to this post. Note: I removed a couple of sensitive items from the config file I would rather not have...
View ArticleRe: Very strange ER pro8 behaviour on facebook, instagram and some sites
jms33 wrote:If you suspect the Edgerouter, could you post your config?areba@ubnt:~$ show configuration firewall { all-ping enable broadcast-ping disable group { network-group PRIVATE_NETS { network...
View ArticleRe: DPI: Netflix not being flagged
As a WISP, with EdgeRouter 8Pro at my core, I use DPI to get a glimpse of what my users are up too. As recently as yesterday Netflix was flagged as "netflix". Netflix accounts for 30% of my traffic. I...
View ArticleClik here to view.
Re: Communication between subnets
Thanks all for the help, still no solution yet All devices use the ER as the default gateway.Traceroute from both clients hangs at the ER.Packet capture shows ICMP request hitting other device and a...
View ArticleRe: DPI: Netflix not being flagged
Oh hmm, I wonder if it matters where the content is delivered from. I use RCN internet at home and I know that my Netflix streams come from RCN's network (I'm sure most likely using Netflix's Open...
View ArticleRe: Very strange ER pro8 behaviour on facebook, instagram and some sites
I see, you're load-balancing across three WANs? What if you temporarily disable the loadbalancing and choose one of the WANs - is the problem resolved? If not, what if you try one of the other two...
View ArticleRe: Losing connection to server using remote desktop
I am unable to extract your TAR file (can you just post the plain text config, using CODE and SPOILERS tag?) Are you connected via a VPN? I think you're on the right track with adjusting the MTU, you...
View ArticleRe: simple routing with no NAT between eth1 and eth0
on the 172.16.0.1/21 as you can see from my config, the EdgeMAX is a dhcp server; on the 10.100.0.0/16 there another dhcp server provided from 10.100.100.254 cisco router...but I don't think this is...
View ArticleRe: Traffic policy on VLANs
1. It depends how you set up the policy it can do both.2. you would match it on source ip, unless you want to shape traffic going to a specific destination3.You can have multiple rules per traffic...
View ArticleRe: DPI: Netflix not being flagged
Interesting theory. I only have one upstream provider. Maybe they've added an appliance. I know it's not getting logged as SSL since there wasn't enough SSL traffic for the 2 netflix streams I was...
View ArticleRe: Edge Router X with lots of users
If I was looking to handle that much traffic I would go with the PRO, though I believe the ER-X could probably handle it just fine. The Unifi gateway's and edgerouters for the most part run the same...
View ArticleRe: Very strange ER pro8 behaviour on facebook, instagram and some sites
jms33 wrote:I see, you're load-balancing across three WANs? What if you temporarily disable the loadbalancing and choose one of the WANs - is the problem resolved? If not, what if you try one of the...
View ArticleRe: Very strange ER pro8 behaviour on facebook, instagram and some sites
Are you getting RFC1918 (private address's) from your cellular routers? and what he's asking is if you unplug 2 of your wans does everything work ok off the 1 WAN? He wasn't asking about the cellular...
View ArticleRe: simple routing with no NAT between eth1 and eth0
If the Cisco router is assigning itself as the default gateway, but there is no static route on it to 172.16.0.0/21, then there woud be a problem. Packets from 172.16.0.0/21 may be able to reach...
View Articleconfig-management tftp issue
I'm running firmware 1.9.0 and working on setting up backup via TFTP. I seem to get an error using both the 'save' command and automagic with the "commit" command. save tftp://[REDACTED]/[REDACTED]...
View ArticleRe: Communication between subnets
This sounds like a known issue, it looks like you followed the work around but I would go through this post and just confirm you didn't miss any...
View ArticleRe: Edge Router X with lots of users
An ER-X will handle it fine.Though, if you want a rack-mounted router, you'll need an ER-8.
View Article
