Re: Route based site-to-site vpn edgerouter 8pro x2 not able to establish
Glad to be of some assistance ;p The NAT rule is limited to a single destination address, so it should not interfere with L2TP yes. You can add UDP4500 to the rule as well using a comma on the...
View ArticleRe: Lite-3 (1.10.6) Best Throughput?
(FYI- It does [and the er-x can only fget it asymetrically])
View ArticleClik here to view.
Re: Lite-3 (1.10.6) Best Throughput?
The ERL has done it since the first releases many years ago. This is a test I made even before that I connected it to WAN. I think the FW was pre 1.0 even I did run iperf on a computer on the WAN port...
View ArticleRe: Execute script on PPPoE UP not working
did you make the script executable?chmod +x /etc/ppp/ip-up.d/myscriptInstead of messing with the cmd wrapper use the built in variables# $1 the interface name used by pppd (e.g. ppp3) # $2 the tty...
View ArticleRe: Execute script on PPPoE UP not working
Last thing is I would recommend keeping script in /config/scripts and symbolic linking it!
View ArticleRe: ER-X portforwarding on failover interface
When you're testing this, is eth0 DOWN? If not, the traffic *will* be routed out eth0, since eth1 is for "failover-only".
View ArticleClik here to view.
Re: Execute script on PPPoE UP not working
Hi smyers119, thank you for your advice.I read about those parameters just after i ended this script i will modify it soon. The script was originally in /config/scripts then i moved it to "ip-up.d"...
View ArticleRe: Execute script on PPPoE UP not working
I did a lot of edits because its early here and im not fully awake! So you might not of caught the last part. Use bash instead of vbash
View ArticleRe: Edgerouter Pro NIC teaming?
wrote:Reason I ask when testing my gaming PCs speed connected dirctly to the edgerouter I get pretty close to 800mb. However, if I am viewing a stream from my NVR which is on another port I get closer...
View ArticleClik here to view.
Small Office network - i need advice
Hi all, I'm very impress with the ubnt products and i want to join the club . But i don't know how best to approach this. A little about me:I'm software developer with some knowlage about the networks...
View ArticleRe: Edgerouter Pro NIC teaming?
wrote:I dug this one back up to see if anything has changed. I originally had each port on my edgerouter as a individual subnet. I have a gig connection and frequently test at 900+ mb on speed test...
View ArticleClik here to view.
EoGRE and ip tv
Hello All, I 'm trying to configure two Edgerouters (ER-4 and ER-X) to have an EoGRE over IPSec tunnel working with french provider Orange IPTV boxesMy goal is to have the second TV box working on...
View ArticleRe: Small Office network - i need advice
Yes the ER-4 can easily handle symmetrical gigabit internet.
View ArticleRe: Using dnsmasq with global dns provided by dhcp on wan interface
Great point! I did not even think of it. I will do that. I am still curious (if anything but an academic curiosity now) if dnsmasq can use dhcp provided dns though.
View ArticleRe: EoGRE and ip tv
On many unofficial forums , people can't get it to work without igmp snooping on lan.One big issue is that the provider did not speak about their boxes are working...
View ArticleRe: ER-PRO-8 random reboots 1.9.7-hotfix.1
Thanks for reporting back . Let us know if you run into any other trouble.
View ArticleFeature Suggestion: keep PoE while router is rebooted
Not sure if there is a better way to provide suggestions. It would be nice if router such as: EdgeRouter PoE, model: ERPoe-5 Would keep PoE on during rebooting. I am not sure if EdgeSwitch (such as...
View ArticleClik here to view.
Re: DNS does not work when set to router IP
Seems like you were right with the VLANs. Ihave added "switch0.10" to "listen-on" and DNS works for VLAN ID: 10 with DNS set to 10.0.0.1. Going to add other VLANs but I'm positive now in that it will...
View ArticleLoad-balancing not working as expected
Hi all, I am running an EdgeRouter Lite v1.9.1 in a dual-WAN setup. Load-balancing is configured to use `WAN` on `eth0` as default and `WAN 2` on `eth1` as failover-only. The setup is working fine so...
View Article