Re: Edge Router IPSEC VPN to Watchguard
I noticed that the watchguard is trying to connect but gets a connection timeout when it tries.... 2016-12-09 21:53:12 iked msg=Phase 1 IkeRetryTimeout:: Retrying 1st phase..Debug
View ArticleSourced Based Routing Still broken ERX V1.9.1Beta1
As mentioned in this thread:https://community.ubnt.com/t5/EdgeMAX/Policy-based-routing-source-address-based-not-working-in-EdgeMAX/td-p/1648890 firewall { all-ping enable broadcast-ping disable...
View ArticleRe: Name resolution across OpenVPN
Thanks you for your help !!This would work for only those two sites but if, If I connect from work to the .phi8.home lan .... Of course I can't change the dns configuration of my workplace...
View ArticleRe: How to route all traffic to external ip over specific interface/gateway
<Guess mode on without config shown>Seems like you're using load-balancing. Make an exclusion like shown in KB for packets sourced from PBX, so these packets use main routing table, making the...
View ArticleHow can I manually block dns hosts for LAN on EdgeRouter X without complex...
I'm looking for easy solution of blocking dns hosts for LAN on ER-X. I'd prefer to make changes manually and FTP the updated file. Something like...
View ArticleRe: How to route all traffic to external ip over specific interface/gateway
So i need to add rule like this? rule 20 { action modify description "do NOT load balance destination public address" destination { group { address-group ADDRv4_eth0 } } modify { table main }
View ArticleRe: GUI IPSec Site to Site not going up. ERL to ERX
kallabaz wrote:Tried connecting via IP instead. Didn't work.show vpn ike sa = invalid commandshow vpn ipsec sa = nothing, just a new line.. I'm having the same results with my routers (ER-Lite &...
View ArticleFirewall default action and Wan failover
Hi All Normaly I work on Cisco and Juniper so i'm quite new to this. I have 2 questions I cannot seem to find a answer to: I have made a set of firewall rules for all my vlans, but when default action...
View ArticleRe: Firewall default action and Wan failover
1st , look into this Layman-s-firewall-explanation , maybe you got in and local rules mixed up. (I always try to stay away from firewall_out rules) Loadbalancing uses additional routing tables (201...
View ArticleRe: How to route all traffic to external ip over specific interface/gateway
Yeah, but instead of filtering on destination address, filter on source address (=pbx IP)
View ArticleVLAN over tunnel between Mikrotik and ER-X? Is it possible?
Hello All, I need to connect 2 locations via IPSEC tunnel. Home location will be managed by ER-X and the remote location by Mikrotik. The intention is to carry an untouched VLAN over the tunnel. I was...
View ArticleClik here to view.
Basic Queues - what am I doing wrong?
I'm trying to set per client bandwidth limits (for two different VLANs/subnets) using HFQ in Basic Queues, but I keep getting "Failed to apply the configuration". How am I messing this up?
View ArticleRe: VPN L2tp connection stops working after a connection IP change
Hi Jordan,No I don't have the dhcp-interface set as the dhcp is not for my WAN connection but for my LAN connection. I'm getting an IP address randomly assigned from my wan, that's why I'm using the...
View ArticleRe: ERL dead, power LED blinking rapidly
Hmmm I also had this issue and it was solved by replacing the PSU. Mine was of the the "newer version" and was manufactured "1336K" according to the first part of the serial no. : Is there something...
View ArticleRe: How can I manually block dns hosts for LAN on EdgeRouter X without...
Custom blocking in /etc/hosts only works on ER-X but not entire LAN. Any solution?
View ArticleCannot assign guest SSID to VLAN
I have an access point running dd-wrt and I set it up to tag one of the SSIDs with a VLAN tag (101). I also set up my UER to have a VLAN on switch0 with the same tag. The problem is the SSID is not...
View ArticleRe: ERL dead, power LED blinking rapidly
If replacing the power supply doesn't work then it is dead.RMA if still under warranty.
View Article
