Re: L2TP VPN works fine via Windows 10 but will not work from iPhone or iPad...
Mike,Using Fing on iPhone with the VPN connected:- try pinging 172.217.0.174 (that's the IP for google.com, at least that's what it is for me in my location).- and/or 98.139.183.24 (yahoo.com)-...
View ArticleWhat is the trick to getting NSLOOKUP to work?
Hello, I am on 1.9 and for the life of me, I cannot get nslookup to work on any window devices. Is there a step by step or (current) tutorial on how to get nslookup working?
View ArticleRe: Detour - An EdgeMax app to selectively route different devices through...
Another issue I noted is that my policy routing via the VPN tunnels does not work after a reboot to the ER-X. It starts working when I issue the disconnect & then connect commands to the VPN...
View ArticleRouting two subnets
Is there anyway to set up a single subnet with one DHCP server for multiple ports and still use offloading? This is for a EP-R8.
View ArticleRe: Routing two subnets
The body of your post would imply that you are looking to bridge multiple ports, not route two subnets. On the EP-8 there is no switch chip and bridging is handled by the CPU so it's going to be pretty...
View ArticleRe: What is the trick to getting NSLOOKUP to work?
Where do the clients get the DNS server IP address from? Is the router running DHCP and giving the DNS server or are the clients statically configured? What's the problem you see on the clients?...
View ArticleRe: Hairpin NAT not working since 1.6.0 > 1.9.0 upgrade
I've tried rolling back to 1.8.0 and 1.7.0 with little luck. Hairpin NAT will only work if I roll back to 1.6.0. I've upgraded to 1.9.0 again and tried dumping the port-forwarding config, then set it...
View ArticleSet up different DNS servers for different networks
I'm configuring my EdgeRouter Lite to have four networks VPNISPDMZGUESTFor the DNS, I have it set to Forwarding. However, I don't want to have the DNS requests for the VPN connection going out through...
View ArticleRe: Set up different DNS servers for different networks
Simply set a different DNS server in the DHCP config for the network you want use a different DNS server, and remove the related interface from the forwarding.Cheers,jonatha
View ArticleRe: Configuration reload
What happens when opening GUI when committed but not saved changes are present ?
View ArticleRe: Create and manage OpenVPN certificates on ERL or on separate machine?
I don't know where exactly to transfer them and what changes do I need to make on the ubnt device. I also prefer to use pkcs12 chain that contains everything needed in one file but I'm not sure if ubnt...
View ArticleRe: ObiTalk VOIP
With SIP_ALG disabled, it's time to try "dmz-mode"Some routers have such setting. It effectively maps any outside port to internal device. No checkbox here, code below (unchecked) should behave...
View ArticleRe: EdgeRouter X SFP - route between lan & vlan on internal switch
There's an issue with vlan1 on switch0:With vlan-aware enabled, IP settings shouldn't go under switch0, but under switch0 vif 1 instead.(And in forwarder and nat rules: change switch0 into switch0.1)...
View ArticleCannot access router interface
Hello, I recently bought a EdgeRouter Lite 3 and it works well except that I cannot access the web UI from my PC anymore (I could at the beginning), only from my laptop. If I try to connect from my PC...
View ArticleRe: Cannot access router interface
If from different machine the gui is available, then the issue isn't in the ER ...Try with a different browser...Cheers,jonatha
View ArticleRe: L2TP VPN works fine via Windows 10 but will not work from iPhone or iPad...
Can you post your current config ?
View ArticleRe: Next-Hop Verification on Static Routes?
Not the way I wanted to handle it but it is working out. I put an Edgerouter X (because I had one laying around) at the remote location and have it advertising the routes. If the primary link goes down...
View ArticleRe: L2TP VPN works fine via Windows 10 but will not work from iPhone or iPad...
Hey zougoulou59, Thanks for helping me out. Please find attached my most current config. Best regards, Mike
View Article
