Re: low diskspace at EdgeRouter X-SFP?
No, so as I know. I upgrade from 1.8.5rc1 to 1.8.5 At this time there whas nearly 85 Mbyte free, but now...
View ArticleRe: low diskspace at EdgeRouter X-SFP?
http://community.ubnt.com/t5/EdgeMAX/Unable-to-upgrade-firmware-Not-enough-disk-space-for-root-file/m-p/1593004/highlight/true#M114361
View ArticlePPTP VPN Pass-Through setup woes
I've got an Edgerouter X that is functioning great except it won't let my VPN client connect from my laptop. I tried opening up port 1723 & GRE protocol on my firewall and setting up an...
View ArticleXBOX 1 and 360
I have searched the forums and I am completely astonished on the amount of hassle and probelms there is to get a "open NAT" on these devices. Something has to be done to get this done much, much ,much...
View ArticleClik here to view.
Re: low diskspace at EdgeRouter X-SFP?
Thanks, ptt, that's the solution. Now I have a little more than 108 Mbyte and the next firmware is coming
View ArticleClik here to view.
Re: low diskspace at EdgeRouter X-SFP?
You're welcome !But, thanks goes to UBNT-Stig & UBNT-ancheng
View ArticleER-X-SFP Config on a ER-X?
I need to build out a config for a customer. Can I build it on my ER-X-SFP and then have them restore the config on their ER-X? Thanks!
View ArticleRe: Fuc... USB flash
Every one of my older edgerouter lites have failed USB drives. Final one was just a couple of days ago. I would estimate probably 30 devices in total. These are the older units with the angled edges. I...
View ArticleVPN IPsec site-to-site tunnel in parallel with L2TP IPsec remote access,...
I have two EdgeRouter POE up and running, one at my home and one at my cabin. Between them I have set up an IPsec site-to-site VPN tunnel. In addition, I also have configured VPN PPTP for remote access...
View ArticlePort Forward Restriction
First of all I'm very new to EdgeMax Routers so please bare with me. I need to open a port for machine to allow access from a remote location. I've opened the port and did some testing and all has...
View ArticleRe: Can't access Edgerouter X after WAN + 2LAN2 setup wizard
chrisjl121 wrote:So after using the wizard, if I reboot my mac, select DHCP, then go to 192.168.1.1, I am able to reach the router, but only if I do not connect eth0 to my ISP (Uverse) provided Pace...
View ArticleRe: Newby with a couple of questions
That's the "port forward wizard" page -- it is a stripped down interface to setting up the rules, and doesn't have features that setting up the DNAT and Firewall rules explicitly would.
View ArticleRe: Port Forward Restriction
You need to create the rule using explicit DNAT and Firewall rules, rather than the port forward "wizard" page. Here's an example (for FTP). Firewall: rule 7 { action accept description FTP destination...
View ArticleERL3 - Static IP address reservation without mac address
Hi all I have an ERL-3, and was wondering if I can have a static IP address reserved without it being tied to a mac address?The reason for this is that I have a Synology NAS which I am setting up a...
View ArticleRe: VPN IPsec site-to-site tunnel in parallel with L2TP IPsec remote access,...
Yes it's possible, I do it all the time.What firmware are you on? First upgrade to 1.8.5 if you're not on it.And post your config. show configuration | no-more and copy/paste here. Use code formatting...
View ArticleUEFI / BIOS network booting
How can I add information into config.boot so that devices will choose the correct file during network boot? I am wanting to determine EFI or BIOS and push the correct file. class "pxeclient" { match...
View ArticleVLAN to go out OpenVPN from NordVPN
Has anybody been able to configure an ERLite to use OpenVPN with nordvpn?I can get it to work but I have to put my NAT rule to go out VTUN0 which makes everything go out that interface when I only want...
View ArticleDlink switch with ERPoe-5
I have D-Link WebSmart DGS-1210-28P switch. Is there any compatible issue with EdgeRoute ERPoe-5 ? I want to setup router on stick with dlink vlan feature. Possible ?
View ArticleRe: My bandwidth monitoring solution....
Hi guys. Good info here. A thought - modify the start and stop script to copy the data files to the flash storage on shut down and back on start up. Set a cron job to stop then start vnstat once per...
View ArticleRe: ER-X-SFP Config on a ER-X?
Since they're the same platform, it should work. Just be sure to manually delete from the config file any mention of the eth5 port and of PoE, features that the ERX doesn't support.
View Article
