Re: Can't get traffic on site to site VPN

I have a strong doubt that the route below is correct for what I want...

Thanks,

10.1.1.0/24 [1/0] via IP2 (recursive via GW2 inactive
                                     via GW1 )

This is what I have for all my routes...

ubnt@EdgeRouterPro8:~$ show ip route
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
       O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2> - selected route, * - FIB route, p - stale info
IP Route Table for VRF "default"
S     > 0.0.0.0/0 [1/0] via GW2 inactive
     *>           [1/0] via GW1, eth0
S    *> 10.1.1.0/24 [1/0] via IP2 (recursive via GW2 inactive
                                                         via GW1 )
C    *> NW1/23 is directly connected, eth0
C    *> 127.0.0.0/8 is directly connected, lo
C    *> 172.16.101.0/24 is directly connected, eth2.10
C    *> 192.168.101.0/24 is directly connected, eth2

ubnt@EdgeRouterPro8:~$