Hi 16again,
Below is a snippet of the tcpdump while remote end attempts to telnet to printer 192.168.2.250. You will see there are no recorded instances where 72.13.6.218 is initiating traffic.
What you see instead are:
- my #1 test workstation (192.168.1.39) and printer on 192.168.2.250 going back and forth, because we installed the windows printer driver on the workstation.
- my #2 test workstation (192.168.2.251) pinging 72.13.6.218, becuase I have a continuous ping, but I doubt that will work becuase 192.168.2.251 is not defined in the VPN scope.
10:05:14.692575 STP 802.1w, Rapid STP, Flags [Proposal, Learn, Forward], bridge-id
8000.44:d9:e7:40:00:f7.8001, length 43
10:05:14.828891 IP 192.168.1.39 > 192.168.2.250: ICMP echo request, id 39020, seq
4606, length 64
10:05:14.831955 IP 192.168.2.250 > 192.168.1.39: ICMP echo reply, id 39020, seq 46
06, length 64
10:05:15.138286 IP 192.168.2.251 > 72.13.6.218: ICMP echo request, id 26891, seq 2
0968, length 64
10:05:15.833133 IP 192.168.1.39 > 192.168.2.250: ICMP echo request, id 39020, seq
4607, length 64
10:05:15.840360 IP 192.168.2.250 > 192.168.1.39: ICMP echo reply, id 39020, seq 46
07, length 64
10:05:16.145578 IP 192.168.2.251 > 72.13.6.218: ICMP echo request, id 26891, seq 2
0969, length 64
10:05:16.521857 IP 192.168.2.1.39225 > 255.255.255.255.10001: UDP, length 4
10:05:16.523047 IP 192.168.2.1.41194 > 255.255.255.255.39225: UDP, length 137
10:05:16.686789 STP 802.1w, Rapid STP, Flags [Proposal, Learn, Forward], bridge-id
8000.44:d9:e7:40:00:f7.8001, length 43
10:05:16.834018 IP 192.168.1.39 > 192.168.2.250: ICMP echo request, id 39020, seq
4608, length 64
10:05:16.840613 IP 192.168.2.250 > 192.168.1.39: ICMP echo reply, id 39020, seq 46
08, length 64
10:05:17.152830 IP 192.168.2.251 > 72.13.6.218: ICMP echo request, id 26891, seq 2
0970, length 64
~m