Hey! and thanks for helping!
So to make things easier I here is a quick picof how things dont work:
Image may be NSFW.
Clik here to view.
And this is how it does work:
Image may be NSFW.
Clik here to view.
As for the show config command, that is everything it output.
As for network it's a pretty basic setup, eth0 is wan, eth 1 & 2 are bridged. DHCP server assigned to give 192.168.2.100-254 addresses, with some reservations for devices between x.x.2.1-50. Router being 2.1 and unifi ac 2.2
Although the config didn't display it, I was having some sip issues, so I ran (which cleared it up)
set system conntrack modules sip disable
So from 2 wireless devices, I tried pinging the smart hubs and speaker:
Pinging 192.168.2.54 with 32 bytes of data: Reply from 192.168.2.54: bytes=32 time=145ms TTL=64 Reply from 192.168.2.54: bytes=32 time=3ms TTL=64 Reply from 192.168.2.54: bytes=32 time=12ms TTL=64
Pinging 192.168.2.216 with 32 bytes of data: Reply from 192.168.2.216: bytes=32 time=2ms TTL=64 Reply from 192.168.2.216: bytes=32 time=2ms TTL=64
Pinging 192.168.2.53 with 32 bytes of data: Reply from 192.168.2.53: bytes=32 time=3ms TTL=64 Reply from 192.168.2.53: bytes=32 time=2ms TTL=64
