BranoB wrote:Upstairs ER-X
switch0 eth1,2,3,4
eth0 - connected to modem, no VID, no PVID
eth1 - connected to downstairs - VID 10,20
eth2 - connected to hdhomerun - PVID 10
Downstairs ER-X
switch0 eth0,1,2,3,4
eth0 - connected to upstairs - VID 10,20
eth1 - connected to home wifi - PVID 10
eth2 - connected to guest wifi - PVID 20
OK thanks I'm on it now, I just reset it to default.... For the downstairs ERX under the Basic Setup (where it has options DHCP, Static IP, PPPoE, VLAN, Firewall or DHCPv6) do I choose Static IP? Or do I let it pull it's IP from DHCP and I can set an admin IP for the router itself elsewhere? (like for example, when I drill down into the 'config tree' view I see the default adress 192.168.1.1 listed under eth0) I just want to make sure I set this up correctly so I can still get into the router admin
