Re: Please help me choose SOHO equipment (USG/ER/Other ?)
ER-X-SFP seems like perfect candidate
View ArticleRe: WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED
If you have SSH'D into another router on that same ip before and then started to use the ER-PRO then yes it will show this error. if you have not then i would if i where you look into it more. Edit...
View Articlecan't connect to EdgeRouter via dhcp after wizard setup
The only time I can ping the edgerouter is with a clean config. I cp /opt/vyatta/etc/config.boot.default /config/config.boot then reboot. Set my laptop (running Linux Mint 17.3) to FixedIP at...
View ArticleClik here to view.
Re: can't connect to EdgeRouter via dhcp after wizard setup
Setup your laptop to be 192.168.X.22/24 and give it a try
View ArticleRe: WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED
The correct way to fix this is: ssh-keygen -f ~/.ssh/known_hosts -R <hostname or ip address>
View ArticleRe: ER-X, ERlite-3, ERPro-8 comparison table, and Tomato
Librenms - it's been great with various edge routers.
View ArticleRe: Allow VLAN to VLAN / Subnet to Subnet?
, looks like to me that there isn't another switch providing the same tagging with ports configured for VLANs... thoughts?
View ArticleRe: Questions about EdgeRouter Lite before buy
My connection is RX 30 mbit / TX 100 mbit. I want utilize more channel throughput on VPN. If i connect to VPN by Windows client, it give 30/80 mbit. I'am interesting what maximum speed can give me ERL,...
View ArticleRe: QoS HFQ problem with download
Thank you, but i doesn´t change anything. When i set the download to 8m the customer get a maximum of 7.5Mbit/s, thats okay. When i put the limit higher that 12 the seems to be a limit , maybe in the...
View ArticleRe: can't connect to EdgeRouter via dhcp after wizard setup
Try setting PC to a fixed 192.168.2.x address and see if 192.168.2.1 is pingable on ports eth2-4Try setting PC to a fixed 192.168.1.x address and see if 192.168.1.1 is pingable on ports eth1
View ArticleRe: Please help me choose SOHO equipment (USG/ER/Other ?)
Is it ER-X capable to handle 1G Nat/QoS ?
View ArticleRe: Cake compiled for the ERL
Here is a re-post of my earlier results with "default Cake" including the .flent.gz files. I'll work on some more tests today.
View ArticleClik here to view.
Re: Cake compiled for the ERL
Here are some more results using: Cake's besteffort flag (be)Cake's besteffort and triple-isolate flags together (be_ti)Cake's lan and besteffort flags together (lan_be)fq_codel with Flent's rrul_be...
View ArticleClik here to view.
Re: EdgeRouter X v1.9.0 load-balancing issue
OK. BTW I have alredy opened tech case and should get some info from dev asap.Still it would be great if this thing will be configurable. Other things which frustrates me is how failover works (code...
View ArticleRe: Cake compiled for the ERL
Looks pretty good. at 100mbit, what happens if you set the interface to 100mbit (using ethtool or a device on the other end at 100Mbit) with just fq_codel or cake, no shaping? (does the erx have bql?...
View ArticleRe: Cake compiled for the ERL
hah. Our posts crossed. I'll look at your second set of data in a minute.
View ArticleRe: Allow VLAN to VLAN / Subnet to Subnet?
whowe82 wrote:@dpurgert, looks like to me that there isn't another switch providing the same tagging with ports configured for VLANs... thoughts?Picture looks alright (but we are assuming the switches...
View ArticleRe: Cake compiled for the ERL
The tests using Flent's rrul_be test at 100mbit symmetric are a little surprising, where Cake's average download bandwidth was around 14-15mbit, while fq_codel's was around 21mbit. I did a second...
View ArticleRe: Please help me choose SOHO equipment (USG/ER/Other ?)
Yup, just make sure you've got hwnat (offload) turned on, and you're golden.
View ArticleRe: can't connect to EdgeRouter via dhcp after wizard setup
Your config looks fine. Thing I can't wrap my head around right now is why you're watching eth0 (your WAN / has no DHCP server associated with it) instead of switch0 / eth1 (where the laptop is...
View Article