Re: overwhelmed to say the least
Sorry, again I mispoke. I was referring to the actual port forwarding I had forwarded ports 1-65535 from WAN eth2 to LAN eth5 now I have corrected it to be only the ports I need to gain OPEN nat on...
View ArticleRe: ATT IPv6 6rd with Pace 5268AC and ER X: Help needed for 6rd IPv6 setup
From what I've read after some research, it should be possible! Other people with cisco hardware and even manually were able to establish the 6rd tunnel. I honestly spend well over 3 days on this with...
View ArticleRe: Monthly Data Usage Chart?
Great, I will give this a shot. Thanks for the detailed explanation!
View ArticleRe: Monthly Data Usage Chart?
I failed to initially provide the configuration stanza for the scheduled task to back up the database every 8 hours - edited appropriately (it's near the end). Rodney
View ArticleRe: Access to Draytek Vigor 130 from EdgeRouter Lite 3
Thanks to Jonnym with this post Maintaining access to the DrayTek Vigor 130 web -interface, I now have access.As a novice I substituted by own IP addressses and solved it with a bit of trial and error.
View ArticleRe: Port forward did not work when IP is behind PIA OpenVPN
You created port-group "everything except 5000" .Your alternative idea seems to be apply it on existing firewall modify rule.And that is also fine for not modifying port5000 traffic But the port group...
View ArticleRe: Routing to dual WAN connections with 2 VLANs on LAN with an EdgeRouter Lite
You need to enter the CLI for this . (or feel comfortable using config tree in GUI, which is basically the same)Check out KB PBR
View ArticleRe: upgrade fails from GUI and CLI
Seems like you deleted all images! Whatever you do, don't reboot before installing an image. Only delete an image if you got both active and backup image installed Try downloading the image with your...
View ArticleClik here to view.
Re: DHCP Lease table not updating after enabling dns-masq
Also found https://community.ubnt.com/t5/EdgeMAX/ERL-3-1-9-0-No-DHCP-leases-since-switching-to-DNSMasq/m-p/1644201/highlight/true#M122603
View ArticleRe: upgrade fails from GUI and CLI
Oh great so now what I got a brick? I had an edgemax before this and it fried after working for a few years and this one I can't even get to take an update should I return it to amazon for a replacement?
View ArticleClik here to view.
Re: Modified script for showing dnsmasq's DHCP leases
Sorry to ask but do you know why it isnt working in 1.9?
View ArticleRe: upgrade fails from GUI and CLI
Try downloading the image with your browser first (to your downloads folder), and on ER system tab use "upload system image"
View ArticleRe: Instructions for updating DynamicDNS for ChangeIP.com
Thanks for the detailed answer.I've setup a basic firewall for now and move forward with the other parts of my configuration. Will get back to a more solid Firewall later.As for ChangeIP all has been...
View ArticleNAT bypassing Firewall rules
I noticed that NAT rules seem to bypass any firewall (in) rules. I wanted to restrict access to a forwarding to a certain IP set, but even a drop all for the specific port doesn't seem to do anything....
View ArticleEdge Router Lite on PPPoE 1Gb
Hi,I'm not yet a user of an Edge Router but I want to purchase one soon, but before that I have a few questions:1. Can I have 1Gb/sec troughtpout (WAN > LAN) using hardware offload with the router...
View ArticleRe: dnsmasq and CNAME
options CNAME in Dnsmasq is kinda restrictive in use. You have to satisfy one of the following conditions for a CNAME record to be valid: cname=<cname>,<target>[,<TTL>]There are...
View ArticleRe: [ER-X] random internet dropouts - 1 ER-x + 1 Unifi ACAP-pro
I would take Unifi Pro out of the picture in your problem description unless you meant to say the issue happens over wireless link. When the issue happens next time, plug a PC throught UTP cable into...
View ArticleRe: NAT bypassing Firewall rules
Portforwardings configured in the GUI tab set up firewall rules automatically. If you want to change the behaviour of a portforward remove it and set up a destination NAT in the NAT tab. Afterwards add...
View ArticleRe: NAT bypassing Firewall rules
Actually this is completely unnecessary, I just figured out (again) that the advanced options include "Auto firewall", so you just need to remove that checkbox and you're set.
View Article
