Re: VPN Tunnel Down
Post your entire config. Copy/paste output from show configuration | no-more
View ArticleRe: Edgerouter Pro as L2TP LNS ISP Config
Herdawyn, You can not use the Edgerouer pro as an LNS in this instance.If you need tunnel authentication from your LAC then this cannot be acheived with teh ERPro.I suggest sticking with an alternative...
View ArticleRe: Using DHCP from dnsmasq (u can haz dynamic DNS updates)
Many thanks for the post. I was able to get it working based on your last set of steps. Below is my config for anyone else that is trying to get this working: mjarends@router# show system name-server...
View ArticleClik here to view.
Re: VPN Tunnel Down
UBNT-Jordan wrote:The configuration looks okay from what I can see. Did you restart the VPN and attemp to generat traffic after making these changes? In the CLI in operational mode use "restart vpn"....
View ArticleRe: VPN Tunnel Down
whowe82 wrote:Hrm... I've seen where sometimes you have to change the MTU when using PPPoE... have you tried changing it to like 1492? Have you bounched both sides of the connection too?HI , Both...
View ArticleRe: VISIO shapes/stencils
any chance of getting the ES-12F switch in the stencil? Thanks!
View ArticleRe: Edge Router Lite port forwarding...
Thank you guys for the excellent advice, I am for sure going to apply.
View ArticleRe: Web filtering on edge max
hi i can change the blocking rule and i use webproxy inorder to allow the incoming and outgoing emails
View ArticleRe: VPN Tunnel Down
BranoB wrote:Post your entire config. Copy/paste output from show configuration | no-moreHi , Can i have your email to send the configuration? As the configuration is too big to be posted here....
View ArticleRe: Running OpenVPN on an ER8: 1.9.0 Issues.
WayneGee wrote:...I must also say, I run a Load Balance configuration. Do you still experience pings loss if you disable load-balancing?Show output of "show load-balance status"Show output of "show...
View ArticleRe: Running OpenVPN on an ER8: 1.9.0 Issues.
... Thanks for your reply.... I'll post this over a couple of posts to make it easier. show load-balance watchdog Group DUAL_WAN eth0 status: Running pings: 2629 fails: 3 run fails: 0/3 route drops: 0...
View ArticleRe: Running OpenVPN on an ER8: 1.9.0 Issues.
... What do you do feel is the best way to disable the LB, besides pulling the cable on the non VPN link? Thanks..!!!
View ArticleRe: 1WAN used instead of combination of other WAN (Load Balancing)
configure set interface ethernet eth4 firewall in modify balance set interface ethernet eth4 vif 1001 address 192.168.3.1/24 commit save exit like this? ER continually at 85% CPU usage most of the...
View ArticleDoes EdgeRouter Lite support PPPoE with CHAP as client?
I'm planning to upgrade my home router. My provider's docs say that they use PPPoE with CHAP. Is EdgeRouter Lite up to the task? Also, does it have a GUI for this? (Provider's older lines used PPPoE...
View ArticleRe: Does EdgeRouter Lite support PPPoE with CHAP as client?
What type of service do you have? ADSL? In the UK?If ADSL/VDSL then consider using a Draytek Vigor 130 V/ADSL modem which is versatile enough to handle the incoming standards.Add your PPPoE...
View ArticleRe: Does EdgeRouter Lite support PPPoE with CHAP as client?
Hi Fireblade, thanks for reply! It's an optical fiber line (from NTT in Japan). Provider installs the ONU, which I'm not going to touch. The ethernet line going out of the ONU is the one I'd like to...
View ArticleClik here to view.
Re: Does EdgeRouter Lite support PPPoE with CHAP as client?
OK ignore my post then as it was A/VDSL based.I really can't supply a definitive answer as to whether the ER will work in your instance. Japanese ISP's are not my major subject
View ArticleRe: Does EdgeRouter Lite support PPPoE with CHAP as client?
Thanks for input anyway. In my case, the ISP docs have a (very brief) section about using own router: With a NTT FLET'S connection line your broadband router will need to be PPPoE (PPP Over Ethernet)...
View Article