Re: EdgeRouter lite upgraded from 1.8.0 to 1.8.5 -- eth2 has vanished!
Was able to manually add eth2 back in via the config tree. Might want to document this update behavior somewhere.
View ArticleRe: can't login to Web interface
ok, like i said i may be in over my head here.how do i update?where is the wizard?
View ArticleER-X-SFP - setting the SFP port speed
I would like to use the SFP port on the ER-X-SFP to connect to an Edge Switch 24 Lite. The problem seems to be that I need to set or force the port speed explicitly to 1000mbps on both sides. This...
View ArticleRe: can't login to Web interface
You're in for a lot of trouble if you haven't read the EdgeOS user guide, and can't find the system update or wizard pages.Start here, download the latest firmware and the user...
View ArticleSupernetting on EdgeRouter Pro
Hello, I just took over a project here in which the original admin installed an EdgeRouterPro8. I need to change the network setup so that it has a 255.255.248.0 netmask to accomodate over 400...
View Articlenewby to ERL, create a tunnel with split tunnel
I have a Office here in WA and one in BC, Canada, I have Comcast here and Telus in Canada, have a static IP at both offices offered by the respective modems in each office in bridge mode. I bought two...
View ArticleRe: Ping using specific WAN - ping: sendmsg: Operation not permitted - EdgeOS...
I will try the new firmware this week, and I get back to you. How I can disable the load balance for the traffic generated in the router with the V1.9.0? This is a setting? or its is enabled by...
View ArticleRe: EdgeRouter lite upgraded from 1.8.0 to 1.8.5 -- eth2 has vanished!
There may have been some config that failed to commit on boot. After every upgrade I have a habit of doing: configure load compareIt should say no changes, but if there was an error the "compare" will...
View ArticleRe: Edgemax Torrent blocking
I agree! I'm new to the edgerouter, just got one, and thougt that torrent blocking weren't a big problem, but it sure is.Testing this via Transmission in OsX and nothing stops it from downloading,...
View Articleedgerouter poe only console port lbinking
Good Evening i have a problem with my edgerouter PoE today it apeared with the console port right light blinking and all the other ports on the router off i have no conection to any port including the...
View ArticleRe: Supernetting on EdgeRouter Pro
On the dashboard tab find that particular interface, select Actions/Config and change the subnet to /21.You may need to adjust DHCP range on services tab to match (if you have DHCP service running on...
View ArticleRe: IPSec Site to Site VPN - Aggressive Mode
My custom config file didn't work as I expected it to. What should I have inside it?
View ArticleHaving issues w/ IPSec VPN setup
I'm having issues with my vpn setup and could use a bit of help. My setup is almost there, but is acting.. weird.. I'm attempting to connect my Windows 10 laptop to the vpn for testing (the laptop is...
View ArticleRe: EdgeRouter-X-SFP 1Gbps offload
I understand your point, still confusing nonetheless when you have the following commands: set system offload ipv4 forwarding enable (doesn't work on ERX) and now: set system offload hwnat enable...
View ArticleRe: can't login to Web interface
alk444 wrote:ok, like i said i may be in over my head here.how do i update?where is the wizard? I think you were over your head when you first plugged that dodgy cable in earlier.Post 15 was your...
View ArticleRe: EdgeRouter-X-SFP 1Gbps offload
caesar305 wrote: For whatever reason, I could not get past 630Mbps even on unidirectional traffic. Running gigabit nics, i7 processors, 8GB ram, should be plenty of power to push 1Gbps. I will run the...
View ArticleRe: Ping using specific WAN - ping: sendmsg: Operation not permitted - EdgeOS...
fr4g wrote:@UBNT-stig I will try the new firmware this week, and I get back to you. How I can disable the load balance for the traffic generated in the router with the V1.9.0? This is a setting? or its...
View ArticleRe: IPSec Site to Site VPN - Aggressive Mode
Ok, I got it up and running! I simplified my /config/ipsec.conf conn %default keyexchange=ikev1 aggressive=yes conn peer-216.194.124.244-tunnel-1 aggressive=yes Then it came up with no issuse. IPSEC...
View ArticleRe: ERL + ERPro + Interface tunnel GRE and OSPFv3
Can you ping6 across the tunnel interface? Anything in the logs about ospf? Try doing a tcpdump on it and see if you can see the ospf packets from each side or if something is dropping them.
View ArticleRe: EdgeRouter-X-SFP 1Gbps offload
interfaces { ethernet eth0 { address 192.168.50.1/24 duplex auto speed auto } ethernet eth1 { address 192.168.51.1/24 duplex auto speed auto } ethernet eth2 { duplex auto speed auto } ethernet eth3 {...
View Article
