Re: Losing connection to edgerouter x
You'll need to change the port for your GUI since you're trying to use the same port for forwarding to your NAS. SSH into the command line console (if you're on Windows, you'll need download something...
View ArticleRe: Losing connection to edgerouter x
Thanks, I'll give that a try. That makes sense. I want to leave the router at the defaults so I can just make the changes on the nas, that way I won't forget and go crazy trying to figure out why that...
View ArticleRe: Simple Dual-WAN, Failover Only?
This may be out there, but it looks as if your system DNS server is on the other end of your openvpn tunnel. The watchdog specifies 'ping.ubnt.com' as the target for its probes, so the assumption is...
View ArticleRe: UDP packet loss with EdgeRouter Lite
Running performance tests on the router itself doesn't make any sense, it's a router, its job is to forward packets, it's not a general purpose server appliance.
View ArticleRe: Edgerouter Lite WAN with VLAN
set interfaces ethernet eth0 vif 10 description "xxxxxxxx"set interfaces ethernet eth0 vif 10 mtu xxxxIf coonnect via PPPoEset interfaces ethernet eth0 vif 10 pppoe 0 default-route autoetc.And then...
View ArticleEdgeswitch 8 and Edgepoint R6 config help
hello ubnt users, got some questions relating to Edgeswitch 8 and Edgepoint R6 is it possiable to use the Edgepoint configured as a switchtrunk the fibre port on the edgepoint and connect to the fibre...
View ArticlePptp server can not pass internet
I have er-x model i have setup correctly and i have access through pptp vpn to my local lan. I want to have internet from the vpn tunnel and i can not find a solution? Any ideas?
View ArticleEdgeMAX DDNS configuration for ClouDNS
Hello ClouDNS uses a URL (https://ipv4.cloudns.net/api/dynamicURL/?q=xxxxxxxx) to update a dynamic host name. No username/password required and it uses a unique and very long not guessable query...
View ArticleRe: PPPoE / routing CRITICAL problem with 1.9.0
UBNT-afomins wrote:paszczus wrote:Another user with same problem: paszczus@ERPro:~$ show pppoe-server | grep 202.108 pp33-str 00h40m01s PPPOE pppoes86 xxx.xxx.202.108 274 243.6K 4.6K 352.9K...
View ArticleRe: Edgeswitch 8 and Edgepoint R6 config help
afaik, on recent OS versions, the EP-R6 web-gui includes a wizard, to turn it into a layer2 switch
View ArticleERX BT Infinity should vlan be enabled or not?
BT Infinity in the UK supports VLAN on the ID 101, but it seems to work without it. Now, correct me if I'm wrong but the benefits of VLAN is to isolate networks, but I'm confused how this would work on...
View ArticleRe: Edgeswitch 8 and Edgepoint R6 config help
yes i found that, however it doesn't seem to pipe the data down the fibre port eth5.eth5 is not included in the switch config.....all other ports eth0 - eth4 work on switch just fine........except for...
View ArticleRe: Simple Dual-WAN, Failover Only?
Nope. Name server is on the LAN, at 172.16.104.35. I had the same thought, until I realized the WAN2 pings weren't working even when WAN was still up, and its pings were. So it's not name resolution....
View ArticleSynology OpenVPN Behind EdgeRouter
I have setup a synology OpenVPN server sitting behind EdgeRouter. I enable port forwading at edgerouter so it forward TCP: 1194 traffice to my synolgoy OpenVPN server. I can connect from office and...
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
Hello,Thank you for an excellent guide.I've successfully added a vlan to use the PIA VPN and all is working well. However, once the connection is made I can no longer reach the computers in that vlan...
View ArticleRe: UDP packet loss with EdgeRouter Lite
Perhaps not, but the same issue occurs on the Windows client if you read the post.
View ArticleRe: Edgeswitch 8 and Edgepoint R6 config help
The OS and wizard are also used by ER-X....which doesn't have the fiber port, so maybe the wizard ignores eth5. After running the wizard, try adding eth5 to switch0.
View ArticleRe: UDP packet loss with EdgeRouter Lite
Kinda Irrelvant mate. Your not exactly testing the problem as it stands.Testing from the router is not the issue. Please read the whole post them try the test again under the same circumstances. You...
View ArticleRe: IPv6 BGP issue
I tried configuring BGP with IPV6 neighbor and with IPv6 peer-group and my ER was able to successfully connect to BGP peer both times. I testing thos with 1.8.5 and with 1.9.1 builds. Can you please...
View ArticleRe: Simple Dual-WAN, Failover Only?
I totally missed that /16 on that interface address. Sorry about that.
View Article
More Pages to Explore .....