Re: Performance optimization: Order of firewall zones
HWNAT is only on the ER-X line, and pretty much encompasses the individual rules that you set on any of the other ER series.
View ArticleRe: EdgeMAX EdgeRouter security release frmware v1.9.1.1 has been released!
Looking for a place to report problems but I can’t find any.... Installed 1.9.1 and reset to factory.Ran Basic Wizard and tried to use a different subnet for DHCP. Tried a dozen times, spent most of...
View ArticleRe: Dashboard numbers are wrong?
do you happen to have other routing tables / a secondary WAN setup?
View ArticleRe: Performance optimization: Order of firewall zones
jgfrm wrote:show ubnt offload:IP offload module : loadedIPv4forwarding: enabledvlan : enabledpppoe : enabledgre : enabledIPv6forwarding: enabledvlan : enabledpppoe : disabledIPSec offload module:...
View Articlevlan help
Hello I am trying to make a vlan and admittedly I am new at this so please be patient with me. I am trying to create a vlan for my cameras that do not have access out to the internet. I have a...
View ArticleRe: vlan help
https://help.ubnt.com/hc/en-us/articles/205197630-EdgeSwitch-VLAN-Walkthrough-with-EdgeSwitch-using-Sample-Enterprise-Topology
View ArticleRe: Dual Wan with VPN
Is this a duplicate post? I thought I already answered this question. strong swan does support this, but I don't see where it can be done through configure. you will need to make your own script to...
View ArticleSetting VLAN's with ERX broke it completely
I had to RMA my ERX, it just would not work on 192.168.1.1 after multiple resets.My network is a combo of ERL, USW, and ERX. I would get a USG, but that's another project and dollar for another day....
View ArticleRe: HELP: Windstream Fiber PPPoE (No Modem) Slow Download / Great Upload // ER-8
stufe3 wrote:Multilink is used "to bundle" several physical pppoe interfaces into one link with combined bandwidth, a bit like link aggregation. It has to be supported from the provider side. I don't...
View ArticleFirst Time Setup PPPOE Centurytel ADSL
Hi everyone. I'm new to Ubiquiti and only dabble in networking. I have an EdgeRouter X. I have centurylink ADSL service with a c2000t modem. I have the modem in bridge mode and I want to use the...
View ArticleRe: Setting VLAN's with ERX broke it completely
Post your configurations for your Edgemax devices.Based on your description, I don't think you're setting your VLANs properly. You shouldn't have more than one PVID on a port. If eth0 on the ER-X is...
View ArticleRe: Edgerouter X - can't get port forwarding to work again
Post your configuration. Are all of your LAN ports on switch0 or is eth1 split off onto its own interface?
View ArticleRe: EdgeRouter X 1Gbit fiber slow
To wrap up this thread: I replaced the EdgeRouter X with an EdgeRouter Lite. Full speed was immediately restored, and the abberations when running speed tests disappeared.
View ArticleRe: IP Address Limit per interface?
Yes. I just found out it is an isp limitation and they are resolving it. Such a strange limitation 16 ips.
View ArticleRe: Beta access not working
My access was fixed by chatting to support, thanks to Hannah K, on help.ubnt.com. The help site apparently uses different credentials than the community.ubnt.com and the account.ubnt.com so be prepared...
View ArticleEdgeRouter Pro 8
Hey all, My edgerouter pro 8 just stopped responding when clicking on the Firewall/NAT tab. Tried 3 different browsers same result do i factory reset the thing? Running the latest firmware... 1.9.1.1
View ArticleRe: EP-R6 and bootloader update
This is my I have got:$ sudo md5sum /dev/mtdblock2 7580ebd7ce9303243292f586ab7c6daf /dev/mtdblock2By the way, this is the output of:$ show system storage Filesystem Size Used Available Use% Mounted on...
View ArticleEdgeMAX - L2TP Multi session
First off,Thank you for reading this message and I hope somebody can help.Scenario:I tested the L2TP VPN with a Windows 10 Machine and an Android phone at the same time and both of which got a...
View ArticleRe: Help with configuration - The same IP addresation as from the ISP to...
Hey BranonB, Thank you very much for fast response! Yes, I did used the wizard with the option: WAN+2LAN2, maybe I did mistake because I should configure the Lan also with the 192.168.1.* ? but I don't...
View Article
More Pages to Explore .....