Re: So you want to replace a BT Homehub?
Opt for the ECI white modem over the Huawei from ebay. Ebay is a good source for these and they are generally unused items as people install a proper router from the outset whilst putting the Openreach...
View ArticleRe: Packet loss connecting external switch to ERP 5
assuming the switch isn't handling the two subnets as two different VLANs -- yes, absolutely.
View ArticleBlock bittorrent and P2P
What's the best way to block P2P traffic using the Edge Router?
View ArticleRe: Block bittorrent and P2P
a DPI-based firewall would probably be the best approach, though it's "hard" to do in general terms, as it's kind of a moving target.
View ArticleRe: Firewall help please: block all except specific MAC, TCP/IP port and UDP
1. correct2. correct3. I think so, responses will come from vtun0 through one of the routes that were set if I understand this right.
View ArticleRe: L2TP VPN with Active Directory/LDAP authentication
though I believe the underlying software (strongswan) does support it.
View ArticleConnecting two Datacenters
We have two datacenters that are connected by 1gb fiber. I am trying to find the best way to connect both subnets. Is there a way to connect both side to the ER PRO and pass interface routes without...
View ArticleRe: IPv6 - LAN not getting IPv6 assigned.
All of the Comcast business modems have broken prefix delegation. The only one that partially works is the netgear modem. Call Comcast and have them replace your current modem with the netgear modem.
View ArticleRe: IPv6 - LAN not getting IPv6 assigned.
The only hitch is the netgear modem only gives out /60's
View ArticleRe: IPv6 - LAN not getting IPv6 assigned.
I have Comcast Business with static ip's as well.I should note I have had dual stack working flawlessly since making them switch the modem to the netgear.I hate Comcast....
View ArticleRe: Firewall rules for protecting a Raspberry Pi
Yes, I am running the default firewall.I was actually taking about blocking outgoing connections as well since I don't need it. Would that be a silky thing to do since inbound connections are already...
View ArticleRe: Firewall rules for protecting a Raspberry Pi
probably, since it'll stop the rpi from being able to install updates ... but if you really wanted to do that, it's not exceptionally difficult.
View ArticleRe: Connecting two Datacenters
Assuming the fiber is literally direct-connect between the two ERs, throw some random /30 on those interfaces, and a static route. Should take about 5 minutes. Don't do interface-routes, those are more...
View ArticleRe: Firewall rules for protecting a Raspberry Pi
Yea, forgot about updates.Thank you for your help!
View ArticleRe: Connecting two Datacenters
So for exampleDC1: 192.168.1.1DC2: 192.168.1.2Static route on DC1: destination 10.1.0.0 gateway 192.168.1.2Is that the idea?
View ArticleRe: Firewall help please: block all except specific MAC, TCP/IP port and UDP
okay, this should do it for you then (note, posting from memory, might be a touch off): firewall { name LAN_IN { default-action drop description "drop all traffic" rule 1 { action accept description...
View ArticleRe: Traffic Analysis showing external IP's?
I just set up a brand new ERL-3, updated the latest available firmware as of yesterday, and am seeing these external IPs show in the list too.
View Article
More Pages to Explore .....