Clik here to view.
Re: Edgerouter POE - FTP server
This is the settings right now, do I need to make some settings for NAT?
View ArticleRe: UDP packet loss with EdgeRouter Lite
Good dig jeremejevs!Would be interested to know if UBNT will include this patch in the next alpha release.
View ArticleRe: UDP packet loss with EdgeRouter Lite
itsmarcos wrote:Good dig jeremejevs!Would be interested to know if UBNT will include this patch in the next alpha release.Guess I got excited too early (link)
View ArticleRe: UDP packet loss with EdgeRouter Lite
Yeah, that patch isn't a proper fix either, its description just was outlining the issues with that piece code, which appears to be the culprit in the UDP packet loss we're having.
View ArticleClik here to view.
Re: UDP packet loss with EdgeRouter Lite
jeremejevs wrote:Yeah, that patch isn't a proper fix either, its description just was outlining the issues with that piece code, which appears to be the culprit in the UDP packet loss we're...
View ArticleRe: Edgerouter POE - FTP server
I meant that you had one blocking the ephemeral ports when data was coming back from the ER (presuming you're connecting from the WAN side). Try using explicit DNAT and Firewall rules to create the...
View ArticleRe: OpenVPN on Edge Router - How to renew an expired CA?
Correct - you need to create an entirely new chain (CA, end-entity, anything else), and put them in their relevant places.
View ArticleRe: DNSMasq DNS Not Working
Provided that the ISP is sending those nameservers as part of the DHCP lease, the ER already is.
View ArticleRe: Edge Router Pro Slow Upload Speed
That worked like a charm! Thank you very much for your input and efforts. Much appreciated. I especially appreciate the fact that you included the cli commands with your resolution.
View ArticleRe: Hairpin NAT breaks outside to inside connection (Edgerouter X)
Would you be so kind to provide me with instructions in setting up a rule via the GUI? I am new to this router and still unfamiliar with some settings.And I am not sure what you meant by the second...
View ArticleWireGuard Backported to 3.10, Should Run on Edgerouter
Hey guys, I took the time to backport WireGuard to 3.10, and the latest snapshots now compile and run fine on 3.10 kernels. I mention this here because the Edgerouter is still stuck on 3.10, which is...
View ArticleRe: Edge Router Pro inter-LAN routing issues
I understand needing a static route set up between the 2 LANs on each router. for now i would just like to be able to see the 2 bridge ports from the LAN on the primary router. i can get replies from...
View ArticleRe: Problems with EdgerouterX, DHCP, and vlan
Following the suggestion on the known issue list (which I hadn't seen), the first part of the interfaces portion of my config now looks like this: switch switch0 { description Local mtu 1500...
View ArticleRe: IPSec site-to-site multiple local prefix question
It appears that using a single tunnel with a larger subnet (192.168.0.0/16) on both Azure local gateway and on the ERL has "fixed" this. I would like to correct this issue the right way in the future...
View ArticleRe: IPSec site-to-site multiple local prefix question
With a /16, you are declaring the whole RFC 1918 Class C address space, if this doesn't cause you issues, you should be anyway ok...Cheers,jonatha
View ArticleRe: Edgerouter Lite 3 fails to get wan ip from modem
I will try this. I've always used eth0 for the WAN.
View ArticleRe: Edgerouter Lite 3 fails to get wan ip from modem
I did this using the linksys MAC address, same problem.I will try 7tigers idea, and use the linkysys MAC address and see what happens.
View ArticleRe: Edge Router Pro inter-LAN routing issues
What would be the easiest way for me to do so?
View ArticleRe: EdgeRouter X SFP leaking MAC addresses
I can now confirm leaking packages when hwnat is enabled. I used the following setup to capture the package: [ router] [ isp ] [ mac ] / \ / \ / \ / \ / [ sfp <> eth ] [ sfp <> eth ] / \ /...
View Article
