Re: Dual stack BGP IPv6 not routing to internal network
You missed part of the second command. The neighbour IPv6 address and advertised-routes keyword.Sorry if the following seems offensive, but you seem a little inexperienced with BGP. Are you sure BGP is...
View ArticleRe: Edge Router Pro Slow Upload Speed
I checked the gui for traffic:TX: 1.00 mbps RX: 43kbps - 1.17mbps Here is the configuration (thanks for asking for that and also how to get it!). I took note of the shaper policy which I set up...
View ArticleRe: Edge Router Pro Slow Upload Speed
Your upstream shaper policy seems to be the problem here. you said you have 10Mb of bandwidth yet you have limited yourself to 1000kb (~1Mb)Shown in red:shaper UpStream {bandwidth 1000kbit class 10 {...
View ArticleRe: Edge Router Pro Slow Upload Speed
you'll want to do the same thing with your download policy as it seems your limiting yourself to ~57Mbits
View ArticleRe: L2TP as default internet connection type
The edge router can not be configured as a client natively
View Article@ubnt-afomins post being deleted again can you fix
I need you to work your magic and get my posts undeleted again! Thank you
View ArticleRe: @ubnt-afomins post being deleted again can you fix
post that was deleted was on this thread:https://community.ubnt.com/t5/EdgeMAX/Edge-Router-Pro-Slow-Upload-Speed/m-p/1887602#U1887602
View ArticleClik here to view.
v1.9.1 - establishes two PPPoE connections
v1.9.1 I rebooted because the router was acting weirdly (I lost some UPnP connections and I noticed I was having 2 pppoe0 connections, compared to 1 the day before). Is it normal to have 2 pppoe0 IP's?...
View ArticleRe: Help blocking DHCP
Thanks for the quick reply. The bridge was put in place as it was nice and easy and worked (apart from the obivous issue). Could you help me setting up the routing on this? I have tried setting up...
View ArticleRe: @ubnt-afomins post being deleted again can you fix
smyers119 wrote:@UBNT-afomins I need you to work your magic and get my posts undeleted again! Thank youYour posts should be restored by now.
View ArticleRe: UDP packet loss with EdgeRouter Lite
And today we're back to 80% packet loss. We haven't changed anything since yesterday, it worked fine for the first part of the day, now it's completely broken. I've tried rebooting the router thinking...
View ArticleRe: Force all traffic from specific IP over one WAN in load balanced setup?
-stig Please, give an example for usage of "ADDRv4_eth0"In dual wan with load balance mode - I need all traffic from switch0 (192.168.1.0/24) to selected network, for example 122.154.5.1-122.154.5.200...
View ArticleRe: Severe OSPF problems on 1.9.1
vojtech wrote:I need to correct myself. The network has on average 945 routes - not 2000 (*) - with a few coming or going all the time due to configuration changes. So the numbers that the ZebOS ospf...
View ArticleRe: Help blocking DHCP
Well, when you have 2 independent interfaces serving their own subnet, you need to set up routing and firewall accordingly. Let's say you have eth1 at 192.168.1.1/24 and eth7 at 192.168.7.1/24. If you...
View ArticleRe: VRF support on edge router
So, no one can give me expected date? I will go with Mikrotik then.
View ArticleOpen VPN on EdgeMax X
HI, a complete newbe here...I currenrtly have 2 remote networks that connect to a server in my office. both the remote systems run on rrouters that have open vpn built in and they connect to a server...
View ArticleER-PoE-5 4 switch ports
Is there any way possible to have 4 switch ports on the ER-PoE-5? This device would be a perfect fit for our environment if we could add eth1 to the default switch0.
View ArticleRe: Just switched to EdgeMax
Slowly getting the hang of it now, opening ports was a bit of a headscratcher at first but got it now. Would be nice to see a few more things on future updates tho.
View Article
