Re: Best modem to use with EdgeRouter
Ok will have a look. I will just be using adsl2+ PPPoA.For fttc in the future I hope to use the openreach modem box.
View ArticleRe: url filtering logs location
hallo, can i use the same idea regarding my issue below i have edgemax router which am using as afirewall router to do the folowing tasks below1. controling internet usage2.schedulling some users when...
View ArticleRe: BGP 4 and BGP 6 to Juniper router
From the output of the show ipv6 bgp we can see you're getting a default route from the provider. This is not being added to the IPv6 routing table though as you have a static default route configured....
View ArticleClik here to view.
Re: (1.9.1) Strange DNS behavior with OpenVPN; can only look up...
The host names are in /etc/hosts as they should be - but one odd thing I see is that all of the statically-mapped entries are FQDNs (e.g. "static1.lan.example.com") while all the dynamic entries are...
View ArticleFirmware upgrade did not go well on ER8, did I brick it?
A firmware upgrade from 1.9.0 to 1.9.1 took a very very long time, so at some point I pulled the plug... I think I might have bricked it.... starting up with console access it ends with the following...
View ArticleRe: Using ERLite 3 to block many incoming IP addresses
m4ntis wrote:You can add any IPs that you wish to block in /etc/hosts.deny - and you can add entire subnets to block here.Their goal is not just preventing management access to the router itself.
View ArticleWe need to put fully-qualified names into /etc/hosts
I've found another way to duplicate the problem. I reconfigured BIND on my file server to be a caching/forwarding-only name server, pointing to the router. If I look up host names on this BIND...
View ArticleNOT solved
EDIT: I tried setting the expand-hosts option in dnsmasq, (putting it in /etc/dnsmasq.d/local.conf) but it had no effect.#This should expand host names in /etc/hosts, but doesn'texpand-hostsMore...
View ArticleRe: EdgeRouter Pro and WISP
Yeah I am pretty sure that is how they will be routing them to me @dpurgentWith this knowledge how I go about setting up points 2 and 3?
View ArticleClik here to view.
Re: IPSec configuration to Ubuntu VPS
Thanks, but as I noted in the first post, the VPS works as expected, terminating VPNs from individual machines and bouncing the traffic back onto the net. It's applying the same concepts as executed...
View ArticleRe: Edgerouter X Port Mirroring Issue
Thanks for the reply. Yup, I get the limitations of switches passing unicast traffic. Like you said you need a span / mirror port to capture this traffic. Sorry if this is a silly question but I'm...
View ArticleRe: 2FA Edgerouter
In the past for example, when I setup a VPN on a Cisco ASA I just didn't allow a username and password to gain access to the network, I had a third form of authtication. I have used https://duo.com/ in...
View ArticleClik here to view.
This requires a patch!
This required a bit of surgery to make it work. In order to get FQDNs into /etc/hosts, we need to patch /opt/vyatta/sbin/dhcpd-config.pl as follows: --- dhcpd-config.pl.orig +++...
View ArticleRe: 2FA Edgerouter
The typical way to accomplish this with devices not natively supporting 2FA methods is an internal radius server that requires you to append the second rolling factor to the static password.
View ArticleRe: L2TP VPN - Multiple connections from same NAT'd location
DC3011 wrote:As I cannot have more than 1 active L2TP VPN client in 1.9.1 I'm guessing this STILL hasn't been fixed? This is getting a bit rediculous. Underlying software was fixed over 2 years ago....
View ArticleRe: Edgerouter newbie trying to use managed switch for Vlans
1. Most managed switches should work. I hesitate to say "all" since there might be some weird edge cases out there.2. VLANs are their own separate subnets, not a subset of a subnet (so your last...
View ArticleSplit-Horizon Bridge with Edgerouter BridgeX
If I have multiple interfaces bridged together in the EdgeRouter is there a way I can prohibit them from talking to each other but allow devices plugged directly into the router from talking to the end...
View ArticleRe: IPSec configuration to Ubuntu VPS
I made some progress: I have the tunnel working between the Edgerouter and the VPS- I believe the missing ingredient here was that the tunnel doesn't get established until there's traffic seeking a...
View ArticleEdgemax Multi-WAN and SBR
I've gone through several walkthroughs to setup my config so that my Plex server routes inbound/outbound only through one of my ISP's, while it seems to me I've followed them all, I still get...
View ArticleRe: L2TP VPN - Multiple connections from same NAT'd location
stshaw wrote: DC3011 wrote:As I cannot have more than 1 active L2TP VPN client in 1.9.1 I'm guessing this STILL hasn't been fixed? This is getting a bit rediculous. Underlying software was fixed over 2...
View Article
