Re: ER-POE errors ?
What is the EdgeOS version?And - have you installed any 3rd party software?
View ArticleRe: ER-POE errors ?
Also please attach contents of /usr/share/perl5/Sort/Versions.pm. Thanks!
View ArticleRe: Google docs and delayed page loading bug
Good suggestion. Haven't thought about looking into the modem before.I did that last weekend and have seen on my Cisco EPC3000 log entries (the interface only shows the last 20 lines) like the...
View ArticleRe: L2TP\IPSEC VPN works, then stops until reboot. xl2tpd process at 99% CPU.
If process consumes 100% CPU then it most likely means that process is stuck in an infinite loop. Unfortunately I was not able to reproduce this issue in lab environment and there are no hints of what...
View ArticleRe: load and commit ignores certain rules
If you posted the configuration that you are trying to load (at least the firewall part) then I'm sure somebody would check that.
View ArticleAustralian Metadata Retention - anyone had any success with Edgerouter?
I know there are a few Aussie users here. Australia introduced new laws that require Australian ISP's to mantain metadata for 2 years - it's similar to US CALEA laws, but it doesn't just require us to...
View ArticleRe: EdgeMax 1.9.1 dhcp no domain name..
Thanks for pointing that out. I 've opened a ticket internally to add separate commands for domain-search and domain-name.
View ArticleRe: ER-X How to toggle LAN connection for a PC on and off?
Thanks for the comment about using time based rules and the alternative of using powershell Disable-NetAdapter and Enable-NetAdapter. I believe the connection needs to be toggled at the router. This...
View ArticleRe: bridge interface disappears after reboot
I'm running 1.9.1 and this problem unfortunately still exists. My config is for VLAN QoS where I have to redirect the WAN interface so my QoS rules will actually work on the download side. Kind of a...
View ArticleRe: ER-X and AC-Lite
But if you buy an AC-Lite it will come with a 24V gigabit POE injector that you can use to power the ERX, and then pass through to eth4 for the AC-Lite.Some will tell you the POE injector isn't big...
View ArticleRe: eth0 interface disappeared
Do you have a bridge interface? Take a look at this thread https://community.ubnt.com/t5/EdgeMAX/bridge-interface-disappears-after-reboot/m-p/1718050/highlight/false#M134056
View ArticleEdgeRouter X/Lite Short Frequent Disconnects
I have a number of EdgeRouter X/Lite units deployed for different clients. I noticed on one unit when remoted into a server that my RDP session would disconnect for just a second then come back. This...
View Articleset new DHCP and IP for ER-x
PLease forgive me but I am having a monday morning brain fart... Trying to set a new DHCP server and IP address on ER-X but i have misplaced my cheat sheet. The intructions i have found on the...
View ArticleClik here to view.
Re: Blocking Internet access for certain clients
Thank you for your help, it is much appreciated.I ended up re-configuring my router, so it is no longer bridging. I simply put my PoE surveillance camera on its own segment on eth1, and left the rest...
View ArticleRe: ER-X and AC-Lite
OK, thank you. I wonder which is better... ...a proper 24V power supply driving both and then the cable for the WAN is not 'plugged in to anything else' ...or the injector where 'another bit of wire'...
View ArticleRe: Multiple IPs, outside can't get in
Ok, so you want hairpin nat as well. You still need the DNAT for external access so in rule 10 use eth+ which is supposed to work for both. See EdgeRouter - NAT Hairpin (Nat Inside-to-Inside / Loopback...
View ArticleRe: Config Tree - Interfaces - Ethernet - Bandwidth
Not bandwidth...but new connections are distributed according to the assigned weight values.For large number of connections, bandwidth used is almost according to weights assigned.....but there's no...
View ArticleRe: IPSEC site to site between EdgeMax and Sonicwall NSA 3600
I made the suggested change. No luck
View ArticleRe: IPSEC site to site between EdgeMax and Sonicwall NSA 3600
The users here also connect to the HQ with a SonicWALL VPN client, I have some concern the two are conflicting with each other as there are complaints of disconnects. I'm actually going to scrap the...
View ArticleRe: 2 WANs divided among 1 LAN - No load balance
Thanks for the link. I have a couple of questions,1. The guide creates two separate VLANs and they list a way to link them. Assuming VLAN 1 is 192.168.1.1/24 and VLAN 2 is 172.16.1.1/24, is it possible...
View Article
