New ER-X SFP Not Respnding - Ideas before RMA?
I just got a new ER-X SFP. I had it running for 2 hours before leaving the site. When someone else arrived 30 minutes later, the network was down. He restored connectivity by power-cycling the...
View ArticleRe: IPsec/IKEv2 Server on EdgeRouter Lite
Just wanted to say - iOS actually does have a log that would probably be useful here.The easiest way to access is by plugging your iPhone into a Mac and subsequently browsing the logs in Console.app....
View ArticleRe: Failing Setup for Centurylink Fiber
I am struggling with a similar setup and I'm trying to figure how to "Tag the WAN interface". I have already put the Modem into Bridge Mode "Tagged 201" but after that I can't figure out how to get ER...
View ArticleRe: Please help me setup with Port Forwarding for Plex Server
I see on of your screen shots shows "go premium" on the plex page. I thought you had to have premium for external access.
View ArticleRe: Multiple WAN QoS
Will do as soon as I get home this evening. Should have done that already, but when you have a cold.... The 0.0039% is to test whether or not the policy is being applied. I have a modify rule that...
View ArticleRe: Please help me setup with Port Forwarding for Plex Server
Nope Primium is only if you want to be able to d/l your media and take it with you. Plex has a Remote Access check in the UI / Server Settings that will confirm you can hit your plex server remotely...
View ArticleRe: Brand new ERL out of box - has existing config from somewhere???
I had this happen with an ERL bought on-line 3 years ago in the UK. When I queried with the dealer, they checked the serial humber and said it was a restocked return that they had been told hadn't been...
View ArticleVPN routing multiple networks on EdgeRouter Lite - 1.9.1
I have (2) ERLs that I'm attempting to connect with a site-to-site VPN. I have the VPN configured on each end (see attached images with diagram and config) and I see the tunnels are working via the CLI...
View ArticleRe: Help with Load Balancing2 Wizard
Bump.ER3 V1.91 I was attempting to use the Load Balance2 Wizard and had the exact same results as these fellows - no connectivity from eth0 router 1 to eth0 router 2. Router 1 can ping eth1 and eth2...
View ArticleRe: Loosing LAN Port connection
ok. I did the downgrade. So far, no improvement:Thu Mar 2 22:28:13 CET 2017 64 bytes from bbc-vip113.telhc.bbc.co.uk (212.58.244.68): icmp_req=1 ttl=50 time=50.3 msping: unknown host www.bbc.co.ukThu...
View ArticleRe: Port Forwarding does not seem to be working?
Hello,I'm having the same issue, I've tried all I could, and even followed some community suggestions and still could not. My case is really simple yet difficult. WAN = 41.73.X.X on eth2LAN =...
View ArticleRe: Port Forwarding does not seem to be working?
Sorry I didn't get back to you faster got moved on to another task. However the DNAT & firewall rules worked perfectly for me. Thanks.
View ArticleRe: Port Forwarding does not seem to be working?
Based on my experience forget port mapping.Use DNAT & firewall rules to get it done. Seems to be much more reliable not to mention fine grained control
View ArticleRe: Port Forwarding does not seem to be working?
I've done that too, see the second picture attached above. Didn't work for me. Don't know what I'm doing wrong.
View ArticleRe: Edgerouter X SFP and some APs
After many tries I've gotten the new firmware installed, changed the username/password. However when I go into Network Adapter settings and put my IP/Subnet/Gateway/DNS back to auto I can't access the...
View ArticleRe: Port Forwarding does not seem to be working?
My WAN_LOCAL looks like this for an SSH remote login rule 60 { action accept description SSH-to-Router destination { port 22 } log enable protocol tcp } Under NAT I have this ssh { port 22...
View ArticleRe: ERL3 help
I was unable to [commit] without assigning an interface to 'listen' for DNS. Once I assigned eth1 to listen, I entered the commands you recommended. Nothing. Router will resolve just fine, PC wont....
View ArticleRe: VPN routing multiple networks on EdgeRouter Lite - 1.9.1
You need to switch to routed VPN - VTI interfaces, or you need to add two more VPN tunnels (3 in total, one for each subnet).
View ArticleRe: Loosing LAN Port connection
I'm not at my system, but it may have been version 1.8 that I downgraded to. You have to back up your config, then install the 1.8 image, and then restore the config.
View ArticleRe: Loosing LAN Port connection
ok - thank you for this. Just for future reference for anybody who has the same problem:downgrade from 1.9.1 to 1.9 didn't help: Thu Mar 2 22:42:32 CET 2017 64 bytes from bbc-vip116.telhc.bbc.co.uk...
View Article
More Pages to Explore .....