Re: Support for classless static routes over L2TP
Hello Is there any update on edgerouter supporting CIDR routes natively?
View ArticleIPv6 delegation and SLAAC on ERLite
I'm currently succesfully using an ERLite to get a /56 IPv6 address from Google Fiber and delegate this as /64 addresses to my 2 LANs using the default slaac method. address dhcp description "Google...
View ArticleRe: ER-X-SFP: Replacing operator fibre converter
Dave-D wrote:> this SFP device is apparently both single mode and bidirectional; are you sure this is compatible with the device on the other end of the fiber? Are you sure the fiber is the...
View ArticleRe: ER-Lite L2TP over IPsec VPN help
I'm gonna try one more time here... Will re-explain it though since I've read up since last time. I have an ER-L running the VPN above. It's configured as a 2 LAN (one subnet on each interface), 1 WAN...
View ArticleRe: ERL3 help
In the GUI, go to System and add both DNS servers you want to use (eg. 8.8.8.8, 8.8.4.4) as System Name Servers.SSH into the router and type:configure set service dns forwarding system commit save exit
View ArticleRe: ER-Lite L2TP over IPsec VPN help
I can tell you that it is a bad idea to use a common subnet like 192.168.0.0/24 or 192.168.1.0/24 for you local subnet when you want to vpn in from a remote location. The chance that the subnet you are...
View ArticleRe: UDP packet loss with EdgeRouter Lite
It did not completely clear it for me, but dramatically reduced it to almost non existent. I still see maybe like 20-30 over a half to hour period, but not even close to the hundreds almost thousands I...
View ArticleRe: UDP packet loss with EdgeRouter Lite
I'm also wondering who's using ERL and ERP's here. At first it sounded like this was specific to hardware platform. Could be two different bugs perhaps???
View ArticleRe: L2TP VPN config - today's puzzle!
Thank you for examining this! Here are my interfaces: Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description --------- ---------- --- ----------- eth0...
View ArticleRe: L2TP VPN config - today's puzzle!
ah - the ps grep: user@ubnt:~$ ps ax | grep xl2tpd 1758 ? Ss 0:00 /usr/sbin/xl2tpd 28899 pts/0 S+ 0:00 /bin/busybox grep xl2tpd
View ArticleRe: L2TP VPN config - today's puzzle!
...and my tcpdump during a VPN connection attempt.
View ArticleRe: Edge Router between ISP and Firewall
Here is an example config from one of my cisco routers that I used as a border router. I want to do the same thing with this EdgeRouter. How do I accomplish this? ip routing ip default-gateway...
View ArticleRe: UDP packet loss with EdgeRouter Lite
I saw around 55% packet loss at -b 10M with iperf3 regardless if I enabled or disabled traffic-analysis (DPI was always off anyway, I just disabled EXPORT). I am pretty sure the WAN connection is not...
View ArticleRe: Help setting up new point 2 point site link
Does anyone know if there is a phone number for Ubiquiti support? I can only find an online form to submit to but no support numbers.
View ArticleRe: EdgeRouter ERPoe‑5 on firmware v1.9.1 crashes approximately every 36 hours
OK, the router crashed twice today, so I opted for starting completely from scratch. As you thought, plugging in all of the DHCP entries by hand wasn't that horrible after all. So far so good. I got...
View ArticleRe: L2TP Stopped working after working fine for over a year.
UBNT-afomins wrote: 05[IKE] no IKE config found for 192.168.2.1...192.168.2.232, sending NO_PROPOSAL_CHOSEN 05[ENC] generating INFORMATIONAL_V1 request 424887083 [ N(NO_PROP) ]This NO_PROPOSAL_CHOSEN...
View ArticleRe: Multiple WAN QoS
How do you apply the QoS to a tagged packets? I have a modify rule to apply the mark, and a QoS rule that looks for the mark, but the policy is not getting applied. What am I doing wrong? Note : I am...
View ArticleRe: New ER-8 router having some connectivity problems
I notice that when I do the "show stats" on the Port Forwarding rule, each time I attempt to connect through the Plex server, it increases by 1 packet and 60 bytes. So, something is hitting it, I guess?
View ArticleRe: New ER-8 router having some connectivity problems
OK, I put that in the CLI, and this is the result.----------------------------------------------- Nameservers configured for DNS forwarding ----------------------------------------------- 198.60.22.2...
View ArticleRe: Complete system failure and reinstall procedure.
As far as I know you can do it on ERL via the console port, there is a thread about that (can't remember the name, something with emergency in the title I guess). This allows you to flash the USB...
View Article
