Re: 'hairpin NAT' not working.
Are u sure this is the issue? Can I configure this with the GUI? Where?
View ArticleRe: ERPoE-5 DHCP/Static IP Issues on 1.9.1
Midday bump before this drops off the page. Anyone else with DHCP weirdness?
View ArticleRe: Block DHCP on a physical port
Since eth7 is part of a bridge, I doubt your rules will work.Probably L3 filtering only works when attached to br0, but that affects eth1 tooBeing a bridge, you need to start messing with ebtables on...
View ArticleRe: Static IPv6 Setup
So I am making progress! I am seeing an IPv6 address on my LAN machines, but when I try to test the IP against whatsmyip.org or such, I don't get an IPv6 externally. DO I need a next hop or router to...
View ArticleRe: Block DHCP on a physical port
So I have a different switch plugged into eth7 in another building. That building has a DHCP server of its own. So I am trying to block the local DHCP server in the ER from leasing anything out to a...
View ArticleRe: EdgeRouter X - DOA
after running the WAN+2LAN2 wizard, eth0 is configured to connect to the cable modem. if you used DHCP to connnect to the cable modem, that's what you'll want here when you go through that part of the...
View ArticleRe: EdgeRouter X - Troubleshooting
Try restarting your computer to clear all caches and other random stuff? What happens when you ping the router from your computer?
View ArticleRe: OpenVPN Server TLS config
I believe that command "set encryption x" is the encryption cipher, not the TLS cipher which is a different thing used to secure the control channel
View ArticleVPN Tunnel - one way traffic
Hi Support I got this issue where the IPSEC VPN tunnel is only passing traffic one waythe connection was working just fine, I was doing some tests with Dual WAN switching, just unplugged the cable from...
View ArticleRe: ER8 -Pro large scale NAT
I've installed quite a few ERPro's for public K-12 school districts. At this point the largest district using an ERPro that I work with see around ~2500 concurrent clients each day. The ERPro has...
View ArticleRe: OpenVPN Server TLS config
This is why I recommend using the ovpn file so there is no "translation" of meaning between the CLI nomenclature and what openvpn uses itself.
View ArticleRe: Switch ERL against Edgerouter Pro?
I've only ever used SFP ports to facilitate inter-building ties over fiber and/or long runs over 100m (in my world these scenarios have been one and the same). It's an awesome capability when you need...
View ArticleRe: site to site l2tp connection
Assuming you are testing this over the Internet, one problem is your peers need to be using routable IPs. Take a look at this Vyatta guide to VPNs. It helped me get mine setup....
View ArticleRe: DDNS not directly connected to internet
no, the "web" option is ONLY for telling the router to go out to a web service (e.g. "whatismyip.com") to get your real public IP address, because the one on your WAN interface is wrong. It has nothing...
View ArticleRe: Block DHCP on a physical port
On the dashboard click action > config for the br0 and set address to no address.
View ArticleRe: DDNS not directly connected to internet
Thanks, the issue was I needed to combine your commands with the commands on this page: https://help.ubnt.com/hc/en-us/articles/204952234-EdgeMAX-Dynamic-DNS-commands Is there a way I can check the...
View ArticleRe: DDNS not directly connected to internet
LionHeart wrote:Thanks, the issue was I needed to combine your commands with the commands on this page: https://help.ubnt.com/hc/en-us/articles/204952234-EdgeMAX-Dynamic-DNS-commands Is there a way I...
View ArticleMultiple Public IP Address, Multiple Domains and Hairpin Woes
I made a very vague post in another thread, but in an effort to not threadjack and to get a more solid answer, I decided that this needs its own post. My setup. I have five public ip addresses and...
View ArticleRe: ER8Pro BGP-6: %BGP-5-ADJCHANGE: neighbor Down Interface Flap
Any ideas? As far as i can see, there was no impact on the network, just the ER8Pro unit sending that to my syslog server.I found that strange since flapping that link should impact BGP at all. Kind...
View ArticleRe: 1.9 OSPF-4: Detected router with duplicate router ID
Same here ERlite-3 running 1.9.1 - OSPF-4: Detected router with duplicate router IDRouter ID definitely not duplicate with another router. , has the previous investigation of the issue led to any...
View Article