Re: Help with Site-to-Site VPN with same network on both sides
Thank you for your help. I was working on the configuration with the link you sent me but I can not make it work.The idea is to be able to use a device in the SiteB eth4 with IP 10.100.100.x/ 24 and...
View Articleshow system static-host-mapping not working
static-host-mapping is not an option under system. joubin@home:~$ show version Version: v1.9.1 Build ID: 4939092 Build on: 12/14/16 07:02 Copyright: 2012-2016 Ubiquiti Networks, Inc....
View ArticleRe: Edgemax with Google Fiber and TV
Actually, it should be switch0 instead of eth0. This is why I really need a POE to test on my GF network. Those values were copied and pasted from the ERL config, but weren't adjusted for the POE....
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
So I watched your video and you got some important things wrong. Setting up the connection to PIA is fine but all things related to routes and firewall modify rules are not. First, just by connecting...
View ArticleRe: Edgerouter Lite Boot Trouble
That's crazy, this'll be the second USB stick that this individual ERL has been through in the last two years.
View ArticleRe: Private Internet Access Open VPN - Step by Step Configuration
Thanks for the tips. Turns out it was a DNS problem on this side for the issues with the hostname. I used a help article and one of these threads to create the video. I'll do an update and include...
View ArticleRe: EdgeMax Router Multiple IPSec Site-to-Site VPN EdgeOSv1.9.1
Hi, I have anoter Edge router to configure today. Would you reccomend not upgrading, and if this was inddeed some factory config, is there anything I should be doing before I start?
View ArticleVrrp with port forwarding
i have installed vrrp on two routers, is it possible to setup the routers in a way if you configure port forwarding on the 'master' router. that it automatically push the configuration to the 'slave'...
View ArticleRe: Edgemax advanced configuration
Hi BranoB,my internet speeds are about 10Mbps. radek
View ArticleRe: Known Issues of EdgeMax Series
Is it the U5.5.2dr2/K3.10.14-UBNT that you sent me? That one is working fine for me for basic site-to-site tunnels with x509 and L2TP with PSK. I've not had a chance to test VTI nor GRE. If you have...
View ArticleRe: ERX v1.9.1 firmware issue? router locking up hard!
I have a similar problem... Replaced it with a Unifi Security Gateway (USG) and (less then 1 day) seems ok. Disappointed as I really liked EdgeOS. I was going to exchange the Edgerouter X for...
View ArticleRe: EdgeMax pro 8 crash with only bgp after opening the web interface
I have several known, use a static route after opening the web to border after a time of crach and not ping recover after reboot force plug. Version 1.9.1
View ArticleRe: ipv6 stops working suddenly and unexpectedly
At the moment it is working and the neighbor shows as reachable and I can ping6 it. Will check again when it stops working.
View ArticleRe: Having trouble getting ipv6 working
Just so everybody is clear: My thread and this one have in common what describes. My thread also describes some possible clues as to how/when this happens (not captured in this thread), and refers to...
View ArticleRe: EP-R8 compatability
I configured one awhile ago and i thought I remembered it doing switching. Can you do the wizard WAN+2lan2 and post the config. Make sure running the latest 1.9.1
View ArticleRe: Single Host Separate DNS
Works beautifully thanks.Just a quick one of topic, how could i use this method, with address=/.youtube.com/127.1.1.1 to block youtube?
View Article
More Pages to Explore .....