Re: Poor OpenVPN performance on ER-X
If you're trying to run at line rate (or, rather, saturating what it's capable of delivering), you're going to get drops, as each packet is processed by the (relatively weak) CPU. OpenVPN on...
View ArticleVLAN to LAN communication
I have a Edgerouter and I'm trying to get my old (10.0.1.X) network and my new (192.168.10.X) network to communicate with it. eth0 = WANeth1 = LAN (192.168.1.X)eth1.10 = VLAN (192.168.10.X)eth1.11 =...
View ArticleBlock outgoing connections for some users
What's the easiest way, preferably with the GUI (though not essential) to set up a firewall rule to block outgoing connections while still allowing internal connections for an IP Address range? I'm a...
View ArticleRe: ER-8
What speed is the upstream link (or links)? It's quite likely an ER-X or ER-L may be adequate to the task (at least for now.)
View ArticleRe: ER-8
Wouldn't worry; the only thing it can't do is 10Gb; it is a great router until you need to be looking at ~500Mb. At 100Mb, you really could get by with the ER-X, which is fanless.
View ArticleRe: Poor OpenVPN performance on ER-X
No, as I said: the problem is just a normal running ping, 1 ping per second. I'm not expecting it to run many megabit, but I am expecting it to hold up a single running ping.
View ArticleRe: List of Connected Devices on EdgeRouter Lite?
woops didnt read the title correct, sorry.
View ArticleDynamic DNS External IP
I am successfully using the dynamic DNS feature using my providers web url to obtain my external IP. How can I instruct the edgerouter to use my known external IP? I don't see this option. If I don't...
View ArticleRe: List of Compatible USB drives
I have an older ER-3 which was well beyond the warrenty period and which would not boot. Checking via the console seemed to indicate a corrupted flash drive. This thread motivated me to open the case...
View ArticleRe: Edgerouter ER8 's Configuration
I am up and running. I tested the Internet, streamed videos and it was fast. However the I can't see the access points signal. Maybe I need to open ports. I will try it tomorrow. Thanks a lot.
View ArticleVlans and DHCP Server
I have a question towards the bottom here...but I wanted to give my background and system setup before I ask it: I am new to this type of router/switching setup scenarios. I am pretty well versed in...
View ArticleRe: ipsec vpn newbie help
Took me a minute to find the setting. Once again you nailed it. Thanks.
View ArticleRe: Dynamic DNS External IP
The ER has a dyndns setup option (might be in config tree) ... Shouldn't need to do anything discussion after that.What IP address does the ER show on eth0 /whatever port you're using for WAN?It's not...
View ArticleRe: Create a Firewall Rule using Deep Packet Inspection (DPI)
Do I restart the Edgerouter?
View ArticleRe: Multicast, Sonos, Phorus & Play-Fi Broadcast 255.255.255.255: Discovery...
Does anyone know if applying this same procedure to the USG instead of an edge switch will work? More importantly, will it break anything if I try to do this to the USG? My hardware:Model:...
View Articlevpn first time l2tp/ipsec
Well config posted below, cleaned a little bit. With the config below i cant connect at all. would really appreciate any pointers.vpn { ipsec { auto-firewall-nat-exclude disable ipsec-interfaces {...
View ArticleRe: Home Network Setup Suggestions
The unifi controller needs to be set up only once and only checked occasionally? Because I don't have a dedicated desktop set up with windows, or maybe I will use my work laptop off and on.
View Article