Why VoIP works without problems?
ER-X 1.9.0I know there is a SIP "helper", but what does it do?For security reasons I use on my two phones different SIP ports (11111 and 22222). With my old router I had to forward this ports and to...
View ArticleRe: How to quickly enable/disable port forwarding rules
afaik, port-forward rules don't have enable/disable option. If you manually make portforwards with a dNAT rule and it's accompanying firewall rule, you can disable/enable either the NAT or the...
View ArticleRe: Why VoIP works without problems?
SIP helper alters SIP traffic when traversing NAT, in an effort to better handle NAT on RTP (=audio) setup.In most situations, this only makes things worse, get rid of it. Your phones registers to...
View ArticleRe: SSH session timeout
i manage to sudo bash then the command sshd_config doesnt work and I have to use the command sshd configure after which it says to me: "sshd re-exec requires execution with an absolute path. when i...
View ArticleRe: Edgerouter dns is giving me the sh@#$!!
Small update from me:I've reverted back to firmware 1.9.0Some devices, for example a HDHomerun, did not receive an IP address when DNSMasq was enabled.
View ArticleRe: SSH session timeout
Commands are as below:sudo bashcd /opt/vyatta/etc/ssh/vi sshd_config (This will open the file sshd_config. Move down using arrow keys. Please google vi on linux commands)
View ArticleERX repeatedly requiring reboot to function
I have an ERX with firmware 1.9.1 setup in a simple configuration derived from the setup wizard - WAN eth0, NAS eth1, LAN eth2 (eth2-eth4 in switch mode but not connected until I can get this stable)....
View ArticleRe: Wan address within the local network
Well, you can use notepad++, or save a backup from the router using it's web interface, unzip it and copy the contents from /config/config.boot file.
View ArticleRe: Unable to go from 1.8.0 to 1.9.1 (and 1.9.0)
My problem was resolved by removing the files left over from the web-proxy. I had already turned off the service, but that folder was using over 100 MB of space. Should that be considered a future...
View ArticleOpenVPN with ERPro-8, newbie needs your help
First time poster, long time lurker. I took the plunge and purchased the top of the range router to hopefully serve my openvpn requirements. I run a DOCSIS cable connection benching around 115Mbps. I...
View ArticleRe: Network layout help needed. VLANS?
Aaarrrgggh wrote:Personally, I would place routers in each building, unless you are just taking <10 devices per structure. Try to think more in terms of what data will go where; if 60-70% of the...
View ArticleRe: so many packages dropped, is that to be expected?
So I enabled logging the dropped packages, and I don't see anything suspicous. The log info is sent to a server, and since I'm too lazy to read all the entries, I wrote a program to get some...
View ArticleEdgerouter Security
Hi all,I'm new to Ubiquiti products and have a lot to learn in respect to networking, but I've got a simple question regarding an installation I'm doing for a friend's business.Basically I've installed...
View ArticleRe: unable to execute /sbin/reboot: Input/output erro
Hi Is there any option to erase faulty usb flash drive, then format using some kind of linux based tools ?
View ArticleRe: SSH session timeout
First though you need to press the Esc (escape) key to take you out of edit mode. Here's a basic guide to vi which could have been easily found using your favourite search engine.
View ArticleRe: Network layout help needed. VLANS?
Are the switches in the new barn office not able to handle the VLANs? If they are, I wonder why you want a router there.
View ArticleRe: unable to execute /sbin/reboot: Input/output erro
Complete manual steps to recreate the USB drive are HERE, if you prefer to replace it just firmware image get that from HERE.
View Article
More Pages to Explore .....